Film Size During Bubble Collision With a Solid Surface
- 7 January 2019
- journal article
- research article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 141 (7)
Abstract
The impact and bounce of a bubble with a solid surface is of significant interest to many industrial processes such as froth flotation and biomedical engineering. During the impact, a liquid film becomes trapped between the bubble and the solid surface. The pressure buildup in this film leads to the generation of a film force. The drainage rate of this film plays a crucial role in dictating the bouncing process and is known to be a function of the radial film size. However, radial film size is not an easily attained experimental measurement and requires advanced instrumentation to capture. The bouncing process has been characterized using nondimensional numbers that are representative of the bubble collision and film drainage phenomena. These are: Bond number (Bo), Archimedes number (Ar), Froude number (Fr), and the ratio of film force to buoyancy force (FF/FB). These numbers are used to define a predictive function for film radius. Experimentally validated numerical modeling has been implemented to determine the relationship between the four nondimensional numbers, and a quasi-static model is employed to relate the film force to the radial film size. Comparison of our experimental results is in agreement with the predicted film size within ±20%. From these results, the radial film size during bubble impact with a solid surface may be predicted using the easily measurable experimental parameters of bubble size, bubble impact velocity, and the liquid properties.Keywords
This publication has 39 references indexed in Scilit:
- Effect of Approach Velocity on Thin Liquid Film Drainage between an Air Bubble and a Flat Solid SurfaceThe Journal of Physical Chemistry C, 2017
- The hydrodynamics of bubble rise and impact with solid surfacesAdvances in Colloid and Interface Science, 2016
- Influence of non-ionic and ionic surfactants on kinetics of the bubble attachment to hydrophilic and hydrophobic solidsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2015
- Influence of n-octanol on the bubble impact velocity, bouncing and the three phase contact formation at hydrophobic solid surfacesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2014
- Analysis of energy balance during collision of an air bubble with a solid wallPhysics of Fluids, 2013
- Spatiotemporal Evolution of Thin Liquid Films during Impact of Water Bubbles on Glass on a Micrometer to Nanometer ScalePhysical Review Letters, 2012
- Interpreting the Dynamic Interaction between a Very Small Rising Bubble and a Hydrophilic Titania SurfaceThe Journal of Physical Chemistry C, 2009
- Kinetics of bubble collision and attachment to hydrophobic solids: I. Effect of surface roughnessInternational Journal of Mineral Processing, 2007
- Influence of surface active substances on bubble motion and collision with various interfacesAdvances in Colloid and Interface Science, 2005
- Observations of high Reynolds number bubbles interacting with a rigid wallPhysics of Fluids, 1997