Digitized Reconfigurable Metal Reflectarray Surfaces for Millimeter-Wave Beam-Engineering
Open Access
- 23 June 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (13) , 5811
Abstract
Digitized beam-forming metal reflectarray antennas are designed for the millimeter-wave region. The phase control of antennas has been implemented by the reconfiguration of rectangular grooves on a metal plate. The antenna has 1147 elements arranged in an aluminum metal plate. The depths of all metal grooves are manipulated for designed phase control of high-gain beam-aimed reflectors. We have demonstrated a digitized reconfigurable metal reflectarray to steer a re-radiated millimeter-wave field from the reflector in a two-dimensional scanning plane from −20 to 20. The far-field patterns show that the measured gain of the 2-bit reflectarray is only 1 dB lower than that of a non-digitized reflectarray antenna. The measured peak gain is higher than 31.7 dB, and the measurements show that the gain of the full 40 scanned beam is 31.7 dB and well-defined scanned beams are obtained with a maximum scan gain loss of 0.2 dB. The proposed reconfigurable antennas can be a useful candidate for high-gain beam-aimed antennas for practical reflecting surfaces and a variety of wireless and satellite communication systems.
Keywords
This publication has 17 references indexed in Scilit:
- Non‐resonant conductor reflectarray element for linear reflection phaseElectronics Letters, 2015
- A BST-Integrated Capacitively Loaded Patch for ${K_a}$- and ${X}$-band Beamsteerable Reflectarray Antennas in Satellite CommunicationsIEEE Transactions on Antennas and Propagation, 2015
- Reconfigurable Folded Reflectarray Antenna Based Upon Liquid Crystal TechnologyIEEE Transactions on Antennas and Propagation, 2014
- Design of cylindrically conformed metal reflectarray antennas for millimetre‐wave applicationsElectronics Letters, 2014
- Reflectarray Antenna at Terahertz Using GrapheneIEEE Antennas and Wireless Propagation Letters, 2013
- X-Band Reflectarray Antenna With Switching-Beam Using PIN Diodes and Gathered ElementsIEEE Transactions on Antennas and Propagation, 2012
- Proof of Concept of a Dual-Band Circularly-Polarized RF MEMS Beam-Switching ReflectarrayIEEE Transactions on Antennas and Propagation, 2012
- Metallic-Rectangular-Grooves Based 2D Reflectarray Antenna Excited by an Open-Ended Parallel-Plate WaveguideIEEE Transactions on Antennas and Propagation, 2010
- Design and Measurement of Reconfigurable Millimeter Wave Reflectarray Cells With Nematic Liquid CrystalIEEE Transactions on Antennas and Propagation, 2008
- Design of an Electronically Beam Scanning Reflectarray Using Aperture-Coupled ElementsIEEE Transactions on Antennas and Propagation, 2007