Physical modelling of cyclically thermally-activated helical piles under tensile loading
- 20 July 2026
- journal article
- Published by Emerald Publishing in Géotechnique Letters
- p. 1-7
Abstract
Using physical modelling, this study investigates the response of helical piles under tension loading and subjected to thermal cycles. Helical piles with single and double helices were installed in dry, medium dense sand and subjected to tension mechanical loading, thermal loading (TL) only and thermomechanical (TM) loading. Irrecoverable displacements were observed in all the thermal tests with those in the TM set being larger than those in the TL set. Within the TM set, the settlements were mitigated by about 50% when the pile had two helices rather than one, and about 30% when the global factor of safety was increased. The load–displacement responses demonstrated that more thermal cycles and cycling at lower factor of safety led to increased initial stiffness, ductility and load resistance for the helical piles. However, the maximum increase in tension bearing capacity was no more than 16%, and generally was less than 10%, which is comparable to the variation in repeat isothermal tests and thus, was not considered significant. The effect of thermal cycles on the helical piles under tension loading is less pronounced than for compressive loading and can be mitigated by using an appropriate factor of safety and/or adding a second helix.Keywords
This publication has 18 references indexed in Scilit:
- Energy pile displacements due to cyclic thermal loading at different mechanical load levelsActa Geotechnica, 2025
- Laboratory-scale thermo-activated piles under long continuous operation and different mobilised shaft resistanceActa Geotechnica, 2024
- Small-scale physical modelling of vertically loaded, cyclically thermally-activated helical pilesGeomechanics for Energy and the Environment, 2024
- Thermomechanical Behavior of Energy Piles with Different Roughness Values in Unsaturated SoilJournal of Geotechnical and Geoenvironmental Engineering, 2024
- Pull-Out Response of a Laboratory-Scale Energy Pile Subjected to Cooling CyclesJournal of Geotechnical and Geoenvironmental Engineering, 2021
- The influence of geometry on the performance of a helical steel pile as a geo-exchange systemRenewable Energy, 2021
- Evaluating scale effects and bearing portions in centrifuge modeling of helical anchors: sandActa Geotechnica, 2021
- Thermally-activated piles and pile groups under monotonic and cyclic thermal loading–A reviewRenewable Energy, 2020
- A novel energy pile: The thermo-syphon helical pileApplied Thermal Engineering, 2019
- Thermo-mechanical behavior of energy piles in high plasticity claysActa Geotechnica, 2014