Experimental Investigation of High Temperature Behaviour of an Asphalt Binder Modified with Laval University Silica Based on Multiple Stress Creep and Recovery Test
Open Access
- 28 March 2022
- journal article
- research article
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 17 (1) , 50-73
Abstract
For experimental investigation of the high temperature behaviour of an asphalt binder modified with Laval university silica (LUS-1) nanostructured particle, four different asphalt binders were produced using a mixture of 2, 4, 6 and 8 wt% of this additive and a neat bitumen at 170 °C. The neat bitumen was yielded from crude oil refining and had a penetration grade of 85–100. After a 20 min vibration, the produced mixtures were mechanically mixed for 30 min in a high-shear homogenizer mixer with an angular velocity of 4500 rpm. Then, the modified binders and neat bitumen were subjected to multiple stress creep and recovery (MSCR) test, after the aging process in rolling thin film oven (RTFOT) test. The results of this study, which were in agreement with the results of the dynamic shear rheometer (DSR) test, indicated that LUS-1 could improve the high temperature behaviour of binders. The greatest improvement occurred using 4 wt% of LUS-1, where this improvement was more pronounced at high stress levels. Elevating the levels of stress and temperature led to diminished traffic grade and more viscous behaviour in asphalt binders modified with LUS-1.Keywords
This publication has 36 references indexed in Scilit:
- Asphalt modification using nano-materials and polymers composite considering high and low temperature performanceConstruction and Building Materials, 2017
- Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphaltConstruction and Building Materials, 2016
- The properties of nanosilica-modified asphalt cementPetroleum Science and Technology, 2016
- Experimental investigation of effect of Nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregatesConstruction and Building Materials, 2015
- Relation of chemical composition to asphalt microstructure – Details and properties of micro-structures in bitumen as seen by thermal and friction force microscopy and by scanning near-filed optical microscopyFuel, 2015
- Piperazine and its carboxylic acid derivatives-functionalized mesoporous silica as nanocarriers for gemcitabine: Adsorption and release studyMaterials Science and Engineering: C, 2015
- Creep-recovery behavior of bituminous binders and its relation to asphalt mixture ruttingMaterials and Structures, 2014
- A Review of Advances of Nanotechnology in Asphalt MixturesProcedia - Social and Behavioral Sciences, 2013
- Sustained release of fungicide metalaxyl by mesoporous silica nanospheresJournal of Nanoparticle Research, 2013
- The Relationship of the MSCR Test to RuttingRoad Materials and Pavement Design, 2009