Preparation of Fe–As alloys by mechanical alloying and vacuum hot‐pressed sintering: microstructure evolution, mechanical properties, and mechanisms
- 14 June 2024
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 43 (8) , 3876-3892
Abstract
Arsenic materials have attracted great attention due to their unique properties. However, research concerning iron–arsenic (Fe–As) alloys is very scarce due to the volatility of As at low temperature and the high melting point of Fe. Herein, a new Fe–As alloy was obtained by mechanical alloying (MA) followed by vacuum hot‐pressed sintering (VHPS). Moreover, a systematic study was carried out on the microstructural evolution, phase composition, leaching toxicity of As, and physical and mechanical properties of Fe–As alloys with varying weight fractions of As (20%, 25%, 30%, 35%, 45%, 55%, 65%, and 75%). The results showed that pre‐alloyed metallic powders (PAMPs) have a fine grain size and specific super‐saturated solid solution after MA, which could effectively improve the mechanical properties of Fe–As alloys by VHPS. A high density (> 7.350 g·cm −3 ), low toxicity, and excellent mechanical properties could be obtained for Fe–As alloys sintered via VHPS by adding an appropriate amount of As, which is more valuable than commercial Fe–As products. The Fe‐25% As alloy with low toxicity and a relatively high density (7.635 g·cm −3 ) provides an ultra‐high compressive strength (1989.19 MPa), while the Fe‐65% As alloy owns the maximum Vickers hardness (HV 0.5 899.41). After leaching by the toxicity characteristic leaching procedure (TCLP), these alloys could still maintain good mechanical performance, and the strengthening mechanisms of Fe–As alloys before and after leaching were clarified. Changes in the grain size, microstructure, and phase distribution induced significant differences in the compressive strength and hardness.Keywords
Funding Information
- National Natural Science Foundation of China (51825403)
- National Natural Science Foundation of China (52104406)
- Natural Science Foundation of Hunan Province (2022JJ20074)
- Foundation for Innovative Research Groups of the National Natural Science Foundation of China (52121004)
- National Natural Science Foundation of China (51825403)
- National Natural Science Foundation of China (52104406)
- Natural Science Foundation of Hunan Province (2022JJ20074)
- Foundation for Innovative Research Groups of the National Natural Science Foundation of China (52121004)
This publication has 38 references indexed in Scilit:
- X-ray diffraction (XRD) profile analysis and optical properties of Klockmannite copper selenide nanoparticles synthesized via microwave assisted techniqueCeramics International, 2022
- Direct detection of electronic states for individual indium arsenide (InAs) quantum dots grown by molecular beam epitaxyApplied Surface Science, 2022
- Effect of dry milling and MWCNTs content during fabrication of Fe-MWCNTs metal matrix composite by high energy planetary milling followed by conventional sinteringAdvanced Powder Technology, 2022
- Strain tuned thermal conductivity reduction in Indium Arsenide (InAs) – A first-principles studyComputational Materials Science, 2021
- Sustainable stabilization/solidification of arsenic-containing soil by blast slag and cement blendsChemosphere, 2021
- Cr(VI) removal by micron-scale iron-carbon composite induced by ball milling: The role of activated carbonChemical Engineering Journal, 2020
- Immobilisation of high-arsenic-containing tailings by using metallurgical slag-cementing materialsChemosphere, 2019
- High Thermal Conductivity in Boron Arsenide: From Prediction to RealityAngewandte Chemie International Edition, 2018
- Solidification/stabilization mechanism of Pb(II), Cd(II), Mn(II) and Cr(III) in fly ash based geopolymersConstruction and Building Materials, 2018
- Synthesis of Nanocrystalline Iron Monoarsenide via a Reductive Recombination PathwayJournal of Solid State Chemistry, 1999