An approach for the compatibility of thermoplastic starch/poly (lactic acid) blends using an ester obtained from glycerol and tall oil fatty acids
- 28 July 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (37)
Abstract
This work reports the compatibilization of thermoplastic starch (TPS)/polylactic acid (PLA) blends with a glycerol ester (GE), obtained by modifying glycerol with tall oil fatty acids. The proportions of TPS/PLA studied were 50/50 and 70/30, with the GE amounts from 0 (control sample), 5, 10, 15, and 20 wt%. The effect of the compatibilizer on the structural, thermal, rheological, morphological, mechanical and biodegradation properties of the blends was evaluated. Ultraviolet visible (UV–Vis) analysis of the blends showed that GE improved the light transmission resistance of the materials. The presence of GE resulted in decreased glass transition temperature (Tg) and complex viscosity (η*) values for the blends as opposed to the control sample. Furthermore, η* decreased with the increase in GE content and the η* values were lower than 105 Pa.s. Scanning electronic microscopy analysis revealed that GE improved the interfacial adhesion between TPS and PLA. The tensile modulus (149–414 MPa), tensile strength (5.60–11.6 MPa) and the biodegradability of the blends decreased with GE content, but the water resistance showed an opposite behavior. The GE acted as a plasticizer, compatibilizer and antioxidant for TPS/PLA blends.Keywords
This publication has 44 references indexed in Scilit:
- Improved dispersion of grafted starch granules leads to lower water resistance for starch-g-PLA/PLA compositesComposites Science and Technology, 2013
- The properties of poly(lactic acid)/starch blends with a functionalized plant oil: Tung oil anhydrideCarbohydrate Polymers, 2013
- Physicochemical characterization of monoacylglycerols from sunflower oilProcedia Food Science, 2011
- Biodegradable Blends Based on Starch and Poly(Lactic Acid): Comparison of Different Strategies and Estimate of CompatibilizationJournal of Polymers and the Environment, 2008
- Morphology and properties of compatibilized polylactide/thermoplastic starch blendsPolymer, 2007
- Study on the properties of ethylenebisformamide and sorbitol plasticized corn starch (ESPTPS)Carbohydrate Polymers, 2006
- Polymers from triglyceride oilsProgress in Polymer Science, 2006
- Urea and ethanolamine as a mixed plasticizer for thermoplastic starchCarbohydrate Polymers, 2006
- Improving Polylactide/Starch Biocomposites by Grafting Polylactide with Acrylic Acid – Characterization and Biodegradability AssessmentMacromolecular Bioscience, 2005
- Rheological and thermal properties of thermoplastic starch with high glycerol contentCarbohydrate Polymers, 2004