Study of Various Mechanical Properties of Maize (Zea mays) as Influenced by Moisture Content
Open Access
Abstract
The mechanical properties of agricultural materials influence not only the loads occurring inside agricultural silos, but also the design of several types of post-harvest machinery. The loads generated by these materials inside silos can be predicted with silo calculation methodologies from their mechanical properties. It has been known for many years that these properties are highly dependent on the moisture content of the material. However, to date, there are not many studies focused on its determination. The goal of this research is the determination of the internal friction angle, apparent cohesion, angle of dilatancy and apparent specific weight of maize when different moisture contents are applied. The equipment used for this study consisted mainly of direct shear and oedometer assay apparatus. The maize samples used were moistened using a climatic chamber. Moisture contents applied to maize samples ranged from 9.3% to 17.4%. Results similar to those provided by other authors were obtained for the internal friction angle, apparent cohesion and apparent specific weight. On the other hand, the values obtained for the dilatancy angle of maize as a function of moisture content could not be compared because nothing has been published so far. The values obtained for this parameter overlap with those published for this material under ambient conditions. In addition, for the samples tested, these results did not allow confirming the existence of a direct relationship between the dilatancy angle and the moisture content. Finally, the increase in moisture content led to an increase in apparent specific weight, which differed from that published in the literature. The values provided here can be used for the optimization of storage and handling structures for granular agricultural materials.Keywords
All Related Versions
Funding Information
- Agencia Estatal de Investigación (PID2019-107051GB-I00/AEI/10.13039/501100011033)
This publication has 44 references indexed in Scilit:
- Simulation of bulk density distribution of wheat in silos by finite element analysisJournal of Stored Products Research, 2018
- DEM investigation of the effect of intermediate principle stress on particle breakage of granular materialsComputers and Geotechnics, 2017
- Maize grain shape approaches for DEM modellingComputers and Electronics in Agriculture, 2015
- Three dimensional discrete element models for simulating the filling and emptying of silos: Analysis of numerical resultsComputers & Chemical Engineering, 2012
- Discrete element modelling of grain flow in a planar silo: influence of simulation parametersGranular Matter, 2010
- Determination of the Mechanical Properties of Powdered Agricultural Products and SugarParticle & Particle Systems Characterization, 2009
- Determination of modulus of elasticity of cereals and rapeseeds using acoustic methodJournal of Food Engineering, 2007
- Bond rolling resistance and its effect on yielding of bonded granulates by DEM analysesInternational Journal for Numerical and Analytical Methods in Geomechanics, 2006
- Mechanical behaviour and failure of cohesive granular materialsInternational Journal for Numerical and Analytical Methods in Geomechanics, 2004
- Some Physical Properties of Lentil SeedsJournal of Agricultural Engineering Research, 1996