Electrochemical Analysis of Li[sub 4]Ti[sub 5]O[sub 12] Electrode in All-Solid-State Lithium Secondary Batteries
- 1 January 2009
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 156 (2) , A114-A119
Abstract
All-solid-state Li–In∕Li4Ti5O12Li–In∕Li4Ti5O12 cells using the 80Li2S⋅20P2S580Li2S⋅20P2S5 solid electrolyte were assembled to investigate their rate performances and impedance behaviors. Furthermore, Li∕Li4Ti5O12Li∕Li4Ti5O12 cells using 1moldm−31moldm−3 LiPF6LiPF6 dissolved in ethylene carbonate and diethyl carbonate were fabricated for comparison to the all-solid-state cells. In the all-solid-state cells, resistance attributable to the lithium-ion transfer from the solid electrolyte to Li4Ti5O12Li4Ti5O12 spinel phase was observed during the lithium insertion into Li4Ti5O12Li4Ti5O12 spinel phase during the discharge process. Results clarified that the cells using the solid electrolyte showed higher resistance and larger activation energy for this lithium-ion transfer than the cells using the liquid electrolyte. Resistance was not observed in the charge process. The all-solid-state cell showed the average charge voltage of 1.9V1.9V (vs Li) and reversible capacity of ∼80mAhg−1∼80mAhg−1 at the charge current density of 1.3mAcm−21.3mAcm−2 and the discharge current density of 0.064mAcm−20.064mAcm−2 .Keywords
This publication has 18 references indexed in Scilit:
- Improvement of High-Rate Performance of All-Solid-State Lithium Secondary Batteries Using LiCoO[sub 2] Coated with Li[sub 2]O–SiO[sub 2] GlassesElectrochemical and Solid-State Letters, 2008
- LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteriesElectrochemistry Communications, 2007
- Preparation of α-Fe[sub 2]O[sub 3] Electrode Materials via Solution Process and Their Electrochemical Properties in All-Solid-State Lithium BatteriesJournal of the Electrochemical Society, 2007
- Electrochemical and Thermal Investigation of Li[sub 4∕3]Ti[sub 5∕3]O[sub 4] SpinelJournal of the Electrochemical Society, 2007
- Enhancement of the High‐Rate Capability of Solid‐State Lithium Batteries by Nanoscale Interfacial ModificationAdvanced Materials, 2006
- A Self-Assembled Breathing Interface for All-Solid-State Ceramic Lithium BatteriesElectrochemical and Solid-State Letters, 2004
- Solid-state lithium battery with graphite anodeSolid State Ionics, 2003
- Evidence of Two‐Phase Formation upon Lithium Insertion into the Li1.33Ti1.67 O 4 SpinelJournal of the Electrochemical Society, 1999
- Application of Li3PO4-Li2S-SiS2 glass to the solid state secondary batteriesSolid State Ionics, 1995
- Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium CellsJournal of the Electrochemical Society, 1995