LASER CLADDING OF HOT WORK TOOL STEEL (H13) WITH TIC NANOPARTICLES
- 1 January 2019
- journal article
- Published by Turkish Journal of Engineering in Turkish Journal of Engineering
- Vol. 3 (1) , 25-31
Abstract
In this study, titanium carbide nanoparticles (TiC) were coated on the surface of X40CrMoV51 (H13) hot work tool steel by laser coating method. Two stage laser cladding method was employed for coating processes. In the first stage, TiC powders were mixed in the phonelic resin and precoated at 50 µm thickness on the surface of steel substrate under vacuum. In the second stage, laser was directed to the surface and then hard coating layers were obtained on the steel surfaces. A CO2 laser with 2000 W power was operated at continuous-wave mode in the experiments. All laser cladding processes were performed under N2 atmosphere and various laser powers were selected to show the effect of laser power on the quality of coated steel surfaces. The morphology and phase structures were examined by scanning electron microscopy, Xray spectroscopy and optic microscope, respectively. The hardness of coating layers and bonding strength was defined with micro hardness tests and scratch test. The thickness of the coatings layers were measured in the range of 15-130 µm depending on laser powers. It is seen that crack-free, smooth and homogenous coating layers can be obtained at 237 W laser power. According to the hardness and micro-scratch tests results, hardness was improved significantly, and all coating layers had a good metallurgical strength to the substrate.Keywords
This publication has 29 references indexed in Scilit:
- Structure characterisation and mechanical properties of crystalline alumina coatings on stainless steel fabricated via sol–gel technology and fibre laser processingJournal of the European Ceramic Society, 2012
- Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steelTribology International, 2011
- High-temperature properties and microstructural stability of hot-work tool steelsMaterials Science and Engineering: A, 2009
- Adhesion of reactive magnetron sputtered TINx and TICy coatings to AISI H13 tool steelSurface and Coatings Technology, 2007
- Laser deposited TiC/H13 tool steel composite coatings and their erosion resistanceJournal of Materials Processing Technology, 2007
- Microstructure of Al2O3 nanocrystalline/cobalt-based alloy composite coatings by laser depositionMaterials & Design (1980-2015), 2005
- Cr(N,C) diffusion coating formation on pre-nitrocarburised H13 tool steelSurface and Coatings Technology, 2004
- Analysis of the friction and wear behaviour of hot work tool steel for forgingWear, 2003
- MoSi2 laser cladding—A new experimental procedure: double-sided injection of MoSi2 and ZrO2Surface and Coatings Technology, 2003
- The influence of scale on friction in hot metal workingWear, 1981