Investigating the Detection Capability of Acoustic Emission Monitoring to Identify Imperfections Produced by the Metal Active Gas (MAG) Welding Process
Open Access
Abstract
Welding inspection is a critical process that can be severely time-consuming, resulting in productivity delays, especially when destructive or invasive processes are required. This paper defines the novel approach to investigate the physical correlation between common imperfections found in arc welding and the propensity to determine these through the identification of signatures using acoustic emission sensors. Through a set of experiments engineered to induce prominent imperfections (cracks and other anomalies) using a popular welding process and the use of AE technology (both airborne and contact), it provides confirmation that the verification of physical anomalies can indeed be identified through variations in obtained noise frequency signatures. This in situ information provides signals during and after solidification to inform operators of the deposit/HAZ integrity to support the advanced warning of unwanted anomalies and of whether the weld/fabrication process should be halted to undertake rework before completing the fabrication. Experimentation was carried out based on an acceptable set of parameters where extracted data from the sensors were recorded, analysed, and compared with the resultant microstructure. This may allow signal phenomena to be captured and catalogued for future use in referencing against known anomalies.Keywords
This publication has 26 references indexed in Scilit:
- Spectroscopic monitoring of penetration depth in CO2 Nd:YAG and fiber laser welding processesJournal of Materials Processing Technology, 2012
- Advanced technique for non-destructive testing of friction stir welding of metalsMeasurement, 2010
- Signal overlap in the monitoring of laser weldingMeasurement Science and Technology, 2010
- Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc weldingJournal of Materials Processing Technology, 2010
- An Investigation into Cracking in Nickel-Base Superalloy Repair WeldsAdvanced Materials Research, 2010
- Acoustic-emission study of the possibilities of localizing flaws of a welded joint during coolingRussian Journal of Nondestructive Testing, 2009
- Feasibility study of acoustic signals for on-line monitoring in short circuit gas metal arc weldingInternational Journal of Machine Tools and Manufacture, 2004
- Optical fibre sensors for monitoring of welding residual stressesJournal of Materials Processing Technology, 2003
- Solidification cracking in austenitic stainless steel weldsSādhanā, 2003
- An efficient k-means clustering algorithm: analysis and implementationIEEE Transactions on Pattern Analysis and Machine Intelligence, 2002