LMPP Effects on Morphology, Crystallization, Thermal and Mechanical Properties of iPP/LMPP Blend Fibres
- 30 April 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in Fibres & Textiles in Eastern Europe
- Vol. 26 (2(128)) , 26-31
Abstract
The thermal properties and morphological characterisation of isotactic polypropylene (iPP) homopolymer and its blends with low molecular low modulus polypropylene (LMPP) were studied. Firstly blends were prepared with variant LMPP contents, and their properties were characterised using SEM, DSC, XRD, and DMA. Later the mechanical properties of iPP/LMPP blend fibres were investigated. SEM results showed that the iPP/LMPP blends produced smoother surfaces when the LMPP content was increased, as well as the miscibility. All the Tg values with different LMPP percentages were in-between pure iPP and LMPP. The XRD results indicated the LMPP percentage decreased along with the degree of crystallinity of the iPP/LMPP blends (5% to 15%), which increased and then decreased as compared to pure iPP. The elongation at break increased when the LMPP content increased, with the maximum breaking elongation of the LMPP 25% blend reaching 12.95%, which showed great stretch-ability, whereas the elastic modulus of iPP/LMPP blends decreased.Keywords
This publication has 14 references indexed in Scilit:
- EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDSChinese Journal of Polymer Science, 2009
- Influence of Ziegler−Natta Catalyst Regioselectivity on Polypropylene Molecular Weight Distribution and Rheological and Crystallization BehaviorMacromolecules, 2004
- Experimental and theoretical description of low frequency viscoelastic behaviour in immiscible polymer blendsPolymer, 2004
- Morphology development during isothermal crystallization. II. Isotactic and syndiotactic polypropylene blendsJournal of Polymer Science Part B: Polymer Physics, 2001
- Competition between α and γ phases in isotactic polypropylene: effects of ethylene content and nucleating agents at different cooling ratesPolymer, 2001
- Effect of cocrystallization on kinetic parameters of high-density polyethylene/linear low-density polyethylene blendJournal of Applied Polymer Science, 1996
- Crystallinity and mechanical properties of PP-homopolymers as influenced by molecular structure and nucleationJournal of Applied Polymer Science, 1996
- Stereoblock polypropylene/isotactic polypropylene blends. IV. Cocrystallization and phase separationJournal of Applied Polymer Science, 1996
- Stereoblock polypropylene/isotactic polypropylene blends. III. Isothermal crystallization kinetics of iPP componentJournal of Applied Polymer Science, 1995
- Stereoblock polypropylene/isotactic polypropylene blends. I. Phase organizationJournal of Applied Polymer Science, 1994