Hydrophobic Modification of Bi2O3-Doped Si-Ti Composite Film on a Wood Surface
Open Access
Abstract
In order to improve the hydrophobicity of the composite film on the wood surface, the wettability of the wood surface and its morphology, chemical structure, roughness and free energy changes were investigated in this paper after modification treatments with different volume fractions of octadecyltrichlorosilane (OTS) and polydimethylsiloxane (PDMS). It can be found that the water contact angle and surface roughness of the hydrophobically modified wood increased with the increase in volume fraction, but the overall effect of OTS hydrophobic modification was better than that of PDMS, and a maximum water contact angle of up to 140.8° could be obtained at a volume fraction of 2% of OTS. In addition, the intensity of the stretching vibration peak of -OH was weakened after the modification, while the intensity of the stretching vibration peak of -CH2- was enhanced, resulting in an increase in hydrophobicity. At the same time, it can be found that the surface free energy of the modified wood specimens was reduced, which shows that OTS and PDMS improve the surface hydrophobicity of the wood by increasing the surface roughness and decreasing the surface free energy together. Finally, the hydrophobically modified Bi2O3-doped silica–titanium composite film still possessed high photocatalytic degradation activity for rhodamine B and gas formaldehyde, and the degradation rate could reach more than 90%.Keywords
Funding Information
- Special fund of the National Natural Science Foundation of China (31560191)
This publication has 24 references indexed in Scilit:
- Preparation of hydrophobic SiO2/PTFE sol and antireflective coatings for solar glass coverOptik, 2020
- Enhancing the thermal stability of silica-mineralized wood via layer-by-layer self-assemblyJournal of Thermal Analysis and Calorimetry, 2020
- A robust superhydrophobic antibacterial Ag–TiO2 composite film immobilized on wood substrate for photodegradation of phenol under visible-light illuminationCeramics International, 2016
- Facile fabrication of superhydrophobic surfaces on wood substrates via a one-step hydrothermal processApplied Surface Science, 2015
- Construction of hydrophobic wood surfaces by room temperature deposition of rutile (TiO2) nanostructuresApplied Surface Science, 2015
- One-step synthesis of unique silica particles for the fabrication of bionic and stably superhydrophobic coatings on wood surfaceAdvanced Powder Technology, 2014
- Hydrophobic modification of wood via surface-initiated ARGET ATRP of MMAApplied Surface Science, 2012
- Improvement of water and oil repellency on wood substrates by using fluorinated silica nanocoatingApplied Surface Science, 2011
- Effect of Bi2O3 on structure and wetting studies of Bi2O3–ZnO–B2O3 glassesJournal of Alloys and Compounds, 2011
- Preparation of TiO2–SiO2 film with high photocatalytic activity on PET substrateMaterials Letters, 2006