Real world assessment of an auto-parametric electromagnetic vibration energy harvester
- 15 November 2017
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 29 (7) , 1481-1499
Abstract
The convention within the field of vibration energy harvesting has revolved around designing resonators with natural frequencies that match single fixed frequency sinusoidal input. However, real world vibrations can be random, multi-frequency, broadband and time-varying in nature. Building upon previous work on auto-parametric resonance, this fundamentally different resonant approach can harness vibration from multiple axes and has the potential to achieve higher power density as well as wider frequency bandwidth. This article presents the power response of a packaged auto-parametric VEH prototype (practical operational volume of ∼126 cm−3) towards various real world vibration sources including vibration of a bridge, a compressor motor as well as an automobile. At auto-parametric resonance (driven at 23.5 Hz and 1 g rms), the prototype can output a peak of 78.9 mW and 4.5 Hz of −3dB bandwidth. Furthermore, up to ∼1 mW of average power output was observed from the harvester on the Forth Road Bridge. The harvested electrical energy from various real world sources were used to power up a power conditioning circuit, a wireless sensor mote, a micro-electromechanical system accelerometer and other low-power sensors. This demonstrates the concept of self-sustaining vibration powered wireless sensor systems in real world scenarios, to potentially realise maintenance-free autonomous structural health and condition monitoring.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/L010917/1)
This publication has 38 references indexed in Scilit:
- Piezoelectric energy harvesting from traffic-induced bridge vibrationsSmart Materials and Structures, 2013
- Electromagnetic vibration energy harvesting device optimization by synchronous energy extractionSensors and Actuators A: Physical, 2011
- Harvesting traffic-induced vibrations for structural health monitoring of bridgesJournal of Micromechanics and Microengineering, 2011
- Towards an autonomous self-tuning vibration energy harvesting device for wireless sensor network applicationsSmart Materials and Structures, 2011
- Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generatorPhysica D: Nonlinear Phenomena, 2010
- Energy harvesting from the nonlinear oscillations of magnetic levitationJournal of Sound and Vibration, 2009
- A wideband vibration-based energy harvesterJournal of Micromechanics and Microengineering, 2008
- A piezoelectric power harvester with adjustable frequency through axial preloadsSmart Materials and Structures, 2007
- Energy harvesting vibration sources for microsystems applicationsMeasurement Science and Technology, 2006
- Design of mechanical band-pass filters for energy scavengingJournal of Sound and Vibration, 2006