High‐pressure treatment of water‐filled co‐extruded polylactide films: Effect on microstructure, barrier, thermal, and rheological properties
Authors:
- 9 March 2022
- journal article
- research article
- Published by Wiley in Journal of Food Science
- Vol. 87 (4) , 1754-1766
Abstract
The impact of high‐pressure treatments (450 and 600 MPa) on the morphological, thermal, structural, and barrier properties of commercial coextruded polylactide (PLA) packaging films has been explored to evaluate their applicability in food processing. Pouches filled with water as a food simulant were subjected to high‐pressure treatment for 15 min at ambient temperature. Results indicated no significant changes in the visual appearance, color, integrity, or water barrier properties of the post‐process pouches. However, high‐pressure treatment affected mechanical property results. Thermal analysis of the film showed endothermic double melting peaks (165.12 and 170.55°C), which did not change with the pressurization; however, the exothermic crystallization peak (118.08°C) varied significantly. Both SEM and AFM micrographs demonstrated that the surface morphology and roughness parameters (arithmetic mean [ S a ] and root mean square height [ S q ]) of the films were significantly affected by the HP treatment, which is further complemented by the FTIR spectra and XRD diffractogram. Melt rheology (175–205°C) of the pressure‐treated films showed a significant drop (20–30%) in mechanical rigidity (G′) when compared to the untreated sample. Changes in the microstructure/crystallinity in the PLA films were indicated by van Gurp and Palmen plot. Practical Application: The results reported here can help to improve the design of the coextruded packaging materials so that it can be successfully implemented to high‐pressure processing and high pressure‐assisted thermal processing of food.Keywords
Funding Information
- Kuwait Foundation for the Advancement of Sciences (FB133C)
This publication has 23 references indexed in Scilit:
- Application of high-pressure processing and polylactide/cinnamon oil packaging on chicken sample for inactivation and inhibition of Listeria monocytogenes and Salmonella Typhimurium, and post-processing film propertiesFood Control, 2017
- Tuning of co‐extrusion processing conditions and film layout to optimize the performances of PA/PE multilayer nanocomposite films for food packagingPolymer Composites, 2017
- Thermo-mechanical, structural characterization and antibacterial performance of solvent casted polylactide/cinnamon oil composite filmsFood Control, 2016
- Electrical, thermal, and viscoelastic properties of graphene nanoplatelet/poly(butylene adipate‐co‐terephthalate) biodegradable nanocompositesJournal of Applied Polymer Science, 2016
- Modification and extrusion coating of polylactic acid filmsJournal of Applied Polymer Science, 2015
- Effects of High Pressure Treatments on Polymeric Films for Flexible Food PackagingPackaging Technology and Science, 2014
- Influence of selected packaging materials on some quality aspects of pressure-assisted thermally processed carrots during storageLWT, 2012
- Polylactides—Chemistry, Properties and Green Packaging Technology: A ReviewInternational Journal of Food Properties, 2011
- Effect of high pressure treatment on thermal properties of polylactidesJournal of Food Engineering, 2009
- Mechanical and thermal behaviour of flexible food packaging polymeric films materials under high pressure/temperature treatmentsPackaging Technology and Science, 2008