Abstract
This article investigates the influence of an internal stiffening ring on the fatigue behaviour of an aluminium shoe-base socket connection subjected to cyclic loading. Finite-element models of the connection, with (SBSR) and without (SB) the stiffening ring, are developed and analysed using identical geometry, loading, and boundary conditions in order to isolate the structural effect of the stiffening ring. The numerical results show that the presence of the stiffening ring reduces nominal, hot-spot, and maximum stresses at all load levels, and that the difference between the two configurations becomes more pronounced as the applied load increases. Despite the reduction in absolute stress levels, the stiffened configuration exhibits a higher stress concentration factor due to the redistribution of stresses near the weld toe. Fatigue analyses indicate that fatigue failure in both configurations is governed by the weld toe at the shoe-base pole interface. Overall, the stiffening ring improves the fatigue performance of the connection by reducing local deformation and bending, while local stress concentration at the weld toe remains the critical factor controlling fatigue behaviour.