A combined gate replacement and input vector control approach for leakage current reduction
Authors:
- 13 March 2006
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 14 (2) , 173-182
Abstract
Input vector control (IVC) is a popular technique for leakage power reduction. It utilizes the transistor stack effect in CMOS gates by applying a minimum leakage vector (MLV) to the primary inputs of combinational circuits during the standby mode. However, the IVC technique becomes less effective for circuits of large logic depth because the input vector at primary inputs has little impact on leakage of internal gates at high logic levels. In this paper, we propose a technique to overcome this limitation by replacing those internal gates in their worst leakage states by other library gates while maintaining the circuit's correct functionality during the active mode. This modification of the circuit does not require changes of the design flow, but it opens the door for further leakage reduction when the MLV is not effective. We then present a divide-and-conquer approach that integrates gate replacement, an optimal MLV searching algorithm for tree circuits, and a genetic algorithm to connect the tree circuits. Our experimental results on all the MCNC91 benchmark circuits reveal that 1) the gate replacement technique alone can achieve 10% leakage current reduction over the best known IVC methods with no delay penalty and little area increase; 2) the divide-and-conquer approach outperforms the best pure IVC method by 24% and the existing control point insertion method by 12%; and 3) compared with the leakage achieved by optimal MLV in small circuits, the gate replacement heuristic and the divide-and-conquer approach can reduce on average 13% and 17% leakage, respectively.Keywords
This publication has 19 references indexed in Scilit:
- Simultaneous V/sub t/ selection and assignment for leakage optimizationIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2005
- Leakage control through fine-grained placement and sizing of sleep transistors2005
- Exact and heuristic approaches to input vector control for leakage power reduction2005
- Analysis and minimization techniques for total leakage considering gate oxide leakage2003
- A heuristic to determine low leakage sleep state vectors for CMOS combinational circuits2003
- Estimation of standby leakage power in CMOS circuit considering accurate modeling of transistor stacks2002
- Models and algorithms for bounds on leakage in CMOS circuitsIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 1999
- Maximum leakage power estimation for CMOS circuits1999
- Dynamic threshold-voltage MOSFET (DTMOS) for ultra-low voltage VLSIIEEE Transactions on Electron Devices, 1997
- A 0.9-V, 150-MHz, 10-mW, 4 mm/sup 2/, 2-D discrete cosine transform core processor with variable threshold-voltage (VT) schemeIEEE Journal of Solid-State Circuits, 1996