Optimization of Interconnecting Layers for Double- and Triple-Junction Polymer Solar Cells
- 29 September 2015
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 5 (6) , 1674-1679
Abstract
In solution-processed tandem polymer solar cells, one of the most challenging parts is the optimization of interconnecting layers (ICLs) between subcells. In this study, ICLs were optimized for double- and triple-junction polymer solar cells. We investigated the robustness of PEDOT:PSS/AZO/PEIE ICL for tandem polymer solar cells. Solvent testing for ICL robustness showed a uniform coverage of the PEDOT:PSS layer when prepared without adding DMSO and IPA in PEDOT:PSS and with no use of additional filters. The performance of tandem polymer solar cells was investigated on different temperatures of interfacial layer. The PEDOT:PSS annealing temperature can be used from 120°C to 130°C, while aluminum-doped zinc oxide (AZO) temperature can be used from 120°C to 150°C. Lowering the annealing temperature in ICLs might help to fabricate triple-junction solar cells because they require more layers, and some low-bandgap polymers cannot sustain high temperature. However, reduction in annealing temperature in PEDOT:PSS, AZO, and PEIE led to lower FF and Jsc. A double-junction device Voc of 1.05 V and a triple-junction Voc of 1.4 V indicated that the ICLs worked effectively.Keywords
Funding Information
- NSF CAREER (ECCS-0950731)
- NASA EPSCoR (NNX13AD31A)
- NSF MRI (CBET-1428992)
- SDSU EE
This publication has 20 references indexed in Scilit:
- Morphological Evolution and Its Impacts on Performance of Polymer Solar CellsIEEE Transactions on Electron Devices, 2015
- Low temperature efficient interconnecting layer for tandem polymer solar cellsNano Energy, 2015
- An Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%Advanced Materials, 2014
- Double junction polymer solar cellsJournal of Materials Chemistry A, 2014
- Graphene Oxide-Based Carbon Interconnecting Layer for Polymer Tandem Solar CellsNano Letters, 2014
- Overcoming interface losses in organic solar cells by applying low temperature, solution processed aluminum-doped zinc oxide electron extraction layersJournal of Materials Chemistry A, 2013
- Efficient Tandem and Triple-Junction Polymer Solar CellsJournal of the American Chemical Society, 2013
- Materials and devices design for efficient double junction polymer solar cellsSolar Energy Materials and Solar Cells, 2012
- A review of polymer multijunction solar cellsEnergy & Environmental Science, 2010
- Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar CellsAdvanced Materials, 2009