Long-Term Behavior of PBO FRCM and Comparison with Other Inorganic-Matrix Composites
Open Access
Abstract
Fabric-reinforced cementitious matrix (FRCM) composites, comprising high-strength fiber textiles embedded within inorganic matrices, represent an effective, cost-efficient, and low-invasive solution for strengthening and retrofitting existing masonry and reinforced concrete structures. Among different textiles employed in FRCM composites, polyparaphenylene benzo-bisoxazole (PBO) textiles are adopted due to their high tensile strength and good adhesion with the matrix. Although several experimental, numerical, and analytical works were performed to investigate the mechanical properties of PBO FRCM composites, limited information is available on their long-term behavior, as well as in the case of exposure to aggressive environments. This paper presents and discusses the results of a wide experimental campaign aimed at investigating the effect of different environmental conditions on the long-term tensile behavior of a PBO FRCM composite. Tests are performed using a clamping-grip tensile test set-up. The effect of various aggressive environments on the composite matrix cracking stress, composite tensile strength, ultimate strain, and fully cracked stage slope is investigated by comparing the results of nominally equal conditioned and unconditioned (control) specimens. These results are also compared with those of other FRCM composites comprising glass and carbon textiles subjected to the same conditionings, collected from the literature. The results show only limited reductions in the tensile properties, even after long exposure to aggressive environments.Keywords
Funding Information
- Laboratorio Prove Materiali of the Politecnico di Milano.
This publication has 32 references indexed in Scilit:
- On the effect of curing time and environmental exposure on impregnated Carbon Fabric Reinforced Cementitious Matrix (CFRCM) composite with design considerationsComposites Part B: Engineering, 2017
- Durability assessment of impregnated Glass Fabric Reinforced Cementitious Matrix (GFRCM) composites in the alkaline and saline environmentsConstruction and Building Materials, 2016
- Flexural Strengthening of RC Beams with an Externally Bonded Fabric-Reinforced Cementitious MatrixJournal of Composites for Construction, 2014
- Out-of-plane behaviour of infill masonry panels strengthened with composite materialsMaterials and Structures, 2014
- Durability Analysis for FRP and SRG Composites in Civil ApplicationsKey Engineering Materials, 2014
- Concrete confinement with steel-reinforced grout jacketsMaterials and Structures, 2014
- Flexural Strengthening of RC Beams with Cement-Based CompositesJournal of Composites for Construction, 2011
- Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterizationPolymer Degradation and Stability, 2007
- Experimental In-Plane Behavior of Tuff Masonry Strengthened with Cementitious Matrix–Grid CompositesJournal of Composites for Construction, 2006
- Concrete Confinement with Textile-Reinforced Mortar JacketsACI Structural Journal, 2006