Introducing Fractal Dimension for Interlaminar Shear and Tensile Strength Assessment of Mechanically Interlocked Polymer–Metal Interfaces
Open Access
Abstract
The interlaminar strength of mechanically interlocked polymer–metal interfaces is strongly dependent on the surface structure of the metal component. Therefore, this contribution assesses the suitability of the fractal dimension for quantification of the surface structure, as well as interlaminar strength prediction of aluminum/polyamide 6 polymer–metal hybrids. Seven different surface structures, manufactured by mechanical blasting, combined mechanical blasting and etching, thermal spraying, and laser ablation, are investigated. The experiments are carried out on a butt-bonded hollow cylinder testing method that allows shear and tensile strength determination with one specific specimen geometry. The fractal dimension of the metal surfaces is derived from cross-sectional images. For comparison, the surface roughness slope is determined and related to the interlaminar strength. Finally, a fracture analysis is conducted. For the investigated material combination, the experimental results indicate that the fractal dimension is an appropriate measure for predicting the interlaminar strength.Keywords
All Related Versions
Funding Information
- Deutsche Forschungsgemeinschaft (392676956)
This publication has 22 references indexed in Scilit:
- Joining of metal to plastic using friction lap weldingMaterials & Design (1980-2015), 2014
- Ultrasonic Welding of Aluminum Alloys to Fiber Reinforced PolymersAdvanced Engineering Materials, 2013
- Induction Spot Welding of Metal/CFRPC Hybrid JointsAdvanced Engineering Materials, 2013
- Thermal Joining of Thermoplastic Metal Hybrids by Means Of Mono- and Polychromatic RadiationPhysics Procedia, 2013
- Potential of Laser-manufactured Polymer-metal hybrid JointsPhysics Procedia, 2012
- Laser direct joining of metal and plasticScripta Materialia, 2008
- Enhancement of adhesive joint strength by laser surface modificationInternational Journal of Adhesion and Adhesives, 2007
- Simulation of strength difference in elasto-plasticity for adhesive materialsInternational Journal for Numerical Methods in Engineering, 2005
- Effect of metal surface topography on mechanical bonding at simulated total hip stem-cement interfacesJournal of Biomedical Materials Research, 1999
- Introduction of fractal dimension to adhesive strength evaluation of plasma-sprayed coatingsSurface and Coatings Technology, 1996