Separation method of bending and torsion in shape sensing based on FBG sensors array
Authors:
- Xinhua YiXYXinhua Yi
- Xiangyan ChenXCXiangyan Chen
- Hongchao FanHFHongchao Fan
- Fei ShiFSFei Shi
- Xiaomin ChengXCXiaomin Cheng
- Jinwu QianJQJinwu Qian
- 18 March 2020
- journal article
- research article
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (7) , 9367-9383
Abstract
This paper presents a theoretical method for separating bending and torsion of shape sensing sensor to improve sensing accuracy during its deformation. We design a kind of shape sensing sensor by encapsulating three fibers on the surface of a flexible rod and forming a triangular FBG sensors array. According to the configuration of FBG sensors array, we derive the relationship between bending curvature and bending strain, and set up a function about the packaging angle of FBG sensor and strain induced by torsion under different twist angles. Combined with the influence of bending and torsion on strain, we establish a nonlinear matrix equation resolving three unknown parameters including maximum strain, bending direction and wavelength shift induced by torsion and temperature. The three parameters are sufficient to separate bending and torsion, and acquire two scalar functions including curvature and torsion, which could describe 3D shape of rod according to Frenet-Serret formulas. Experimental results show that the relative average error of measurement about maximum strain, bending direction is respectively 2.65% and 0.86% when shape-sensing sensor is bent into an arc with a radius of 260 mm. The separating method also applied to 2D shape and 3D shape of reconstruction, and the absolute spatial position maximum error is respectively 3.79mm and 11.10mm when shape-sensing sensor with length 500mm is bent into arc shape with a radius 260mm and helical curve. The experiment results verify the feasibility of separating method, which would provide effective parameters for precise 3D reconstruction model of shape sensing sensor.Keywords
Funding Information
- Zhejiang Province Public Welfare Technology Application Research Project (2015C31155)
- Science and Technology Commission of Shanghai Municipality (18JC1410402)
- Department of Education of Zhejiang Province (Y201533757)
- Natural Science Foundation of Ningbo Municipality (2018A610190)
This publication has 19 references indexed in Scilit:
- Curvature, Torsion, and Force Sensing in Continuum Robots Using Helically Wrapped FBG SensorsIEEE Robotics and Automation Letters, 2016
- Table of ContentsIEEE Transactions on Robotics, 2015
- Magnetic Resonance–guided Active Catheter TrackingMagnetic Resonance Imaging Clinics of North America, 2015
- Conformational Modeling of Continuum Structures in Robotics and Structural Biology: A ReviewAdvanced Robotics, 2015
- Shape Tracking of a Dexterous Continuum Manipulator Utilizing Two Large Deflection Shape SensorsIEEE Sensors Journal, 2015
- Fiber-Bragg-grating-based ultrathin shape sensors displaying single-channel sweeping for minimally invasive surgeryOptics and Lasers in Engineering, 2014
- Spatial shape reconstruction using orthogonal fiber Bragg grating sensor arrayMechatronics, 2012
- Accuracy of needle position measurements using fiber Bragg gratingsMinimally Invasive Therapy & Allied Technologies, 2012
- Design and Kinematic Modeling of Constant Curvature Continuum Robots: A ReviewThe International Journal of Robotics Research, 2010
- Analytic Formulation for Kinematics, Statics, and Shape Restoration of Multibackbone Continuum Robots Via Elliptic IntegralsJournal of Mechanisms and Robotics, 2009