Structural biomaterials engineered from lignocellulosic agricultural waste
Authors:
- 25 February 2021
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (26) , 50617
Abstract
Milled sunflower husk was added to three types of polyolefins (polypropylene, low‐density and high‐density polyethylene) in a wide composition range. Composite series were prepared with or without maleic anhydride‐grafted polyolefin coupling agents to investigate the effect of coupling on the mechanical properties and micromechanical deformation processes. Several independent approaches were followed to estimate interfacial adhesion qualitatively and quantitatively, respectively. The results show that interfacial adhesion is significantly improved in the presence of a coupling agent. As a result, coupling changes the dominant deformation process from matrix/filler debonding to the fracture of sunflower husk particles. Milled sunflower husk can enhance significantly the modulus of polyolefins; however, elongation‐at‐break values are very small, especially at larger filler content, which represents the largest obstacle of practical application.Keywords
Funding Information
- Hungarian Scientific Research Fund (FK 129270)
This publication has 45 references indexed in Scilit:
- Micromechanical deformation processes in PP/wood composites: Particle characteristics, adhesion, mechanismsComposites Part A: Applied Science and Manufacturing, 2010
- Micromechanical deformations in PP/lignocellulosic filler composites: Effect of matrix propertiesComposites Science and Technology, 2010
- Reuse of natural fiber reinforced eco‐composites in polymer mortarsPolymer Engineering & Science, 2010
- A plant fiber reinforced polymer composite prepared by a twin-screw extruderBioresource Technology, 2009
- Wood flour filled PP composites: Compatibilization and adhesionComposites Science and Technology, 2007
- Wood flour filled polypropylene composites: Interfacial adhesion and micromechanical deformationsPolymer Engineering & Science, 2007
- Wood flour filled PP composites: adhesion, deformation, failurePolymers for Advanced Technologies, 2006
- Natural Fiber Composites in Automotive Applications2005
- Grafting maleic anhydride and comonomers onto polyethyleneJournal of Applied Polymer Science, 1995
- Dynamic mechanical properties of particulate‐filled compositesJournal of Applied Polymer Science, 1970