Nanolithography using ultrasonically assisted development of calixarene negative electron beam resist
Authors:
- Shazia YasinSYShazia Yasin
- D. G. HaskoDHD. G. Hasko
- Theodore H. FedynyshynTFTheodore H. Fedynyshyn
- Michael F. CroninMCMichael F. Cronin
- Louis C. PoliLPLouis C. Poli
- Christine KondekCKChristine Kondek
- Y. OhnishiYOY. Ohnishi
- S. MatsuiSMS. Matsui
- L. E. OcolaLOL. E. Ocola
- A. SteinASA. Stein
- Shoko ManakoSMShoko Manako
- 1 January 2001
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 19 (1) , 311-313
Abstract
Negative resist image distortion is caused by resist swelling during development and is a major problem in ultrahigh resolution electron beam lithography. This problem has been overcome through the use of ultrasonically assisted development. In addition, exposure dose latitude is increased by 50% compared to conventional dip development, due to the improvement in contrast. These advantages have been exploited in order to realize ∼6 nm wide lines in calixarene resist.Keywords
This publication has 7 references indexed in Scilit:
- Characterisation of the ultrasonic development process in UVIII resistMicroelectronic Engineering, 2000
- Comparison of sensitivity and exposure latitude for polymethylmethacrylate, UVIII, and calixarene using conventional dip and ultrasonically assisted developmentJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1999
- 25 nm pitch GaInAs/InP buried structure: Improvement by calixarene as an electron beam resist and tertiarybutylphosphine as a P source in organometallic vapor phase epitaxy regrowthJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1998
- Ultrasonic and dip resist development processes for 50 nm device fabricationJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Calixarenes-prospective materials for nanofabrications-Microelectronic Engineering, 1997
- Fabrication of 5–7 nm wide etched lines in silicon using 100 keV electron-beam lithography and polymethylmethacrylate resistApplied Physics Letters, 1993
- Nanowriter: A new high-voltage electron beam lithography system for nanometer-scale fabricationJournal of Vacuum Science & Technology B, 1988