Combined Thermofluid and Electromagnetic Optimisation of Stator Vent Cooling
- 1 September 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1116-1122
Abstract
A combined electromagnetic and thermal modelling approach has been developed to optimise the design of multiple radial stator vents in an air-cooled, synchronous generator with a power rating of several hundred kVA. An experimentally validated 3-D Conjugate Heat Transfer Computational Fluid Dynamics model has been created and coupled with 2-D Electromagnetic Finite Element Analysis. Correlations between the combined vent width and rotor copper, rotor iron and stator iron losses were derived from the electromagnetic analysis. These correlations were implemented into the optimisation procedure of the parametric thermofluid model. Five parameters: vent locations, widths and the height of a baffle, were optimised simultaneously with the aim of minimising the peak stator winding temperature. The peak stator winding temperature was reduced by 11.1 %. The average stator winding temperature decreased by 6.3 %. To maintain the machine's power output, the removal of active stator material was compensated by increasing the rotor current.Keywords
This publication has 13 references indexed in Scilit:
- A Fast Method for Modeling Skew and Its Effects in Salient-Pole Synchronous GeneratorsIEEE Transactions on Industrial Electronics, 2017
- CFD optimisation of the thermal design for a vented electrical machine2017
- Analysis of salient-pole synchronous generators operating in single-phase condition2017
- Improved Damper Cage Design for Salient-Pole Synchronous GeneratorsIEEE Transactions on Industrial Electronics, 2016
- Estimation of Equivalent Thermal Parameters of Impregnated Electrical WindingsIEEE Transactions on Industry Applications, 2013
- Computational fluid dynamics modelling of an entire synchronous generator for improved thermal managementIET Electric Power Applications, 2013
- Calculation of Temperature Rise in Air-cooled Induction Motors Through 3-D Coupled Electromagnetic Fluid-Dynamical and Thermal Finite-Element AnalysisIEEE Transactions on Magnetics, 2012
- Evolution and Modern Approaches for Thermal Analysis of Electrical MachinesIEEE Transactions on Industrial Electronics, 2009
- On the Law of Hysteresis (Part II.) and Other Phenomena of the Magnetic CircuitTransactions of the American Institute of Electrical Engineers, 1892
- On the Law of HysteresisTransactions of the American Institute of Electrical Engineers, 1892