Nucleation‐controlled dual semicrystalline morphology of polyamide 11
- 23 May 2018
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 68 (2) , 263-270
Abstract
Crystallization of polyamide 11 at low supercooling of the melt proceeds via heterogeneous nucleation and spherulitic growth of lamellae, while at temperatures close to the glass transition homogeneous nucleation prevails, preventing spherulite formation and leading to formation of a large number of nanometer‐sized mesophase domains. It is shown that spherulitic and non‐spherulitic crystallization at low and high supercooling of the melt, respectively, can be enforced by tailoring the cooling conditions, causing a twofold semicrystalline morphology at ambient temperature. Analysis of non‐isothermal crystallization as a function of the cooling rate, using fast scanning chip calorimetry, reveals that in the case of polyamide 11 such twofold semicrystalline morphology is predicted when cooling at rates between about 20 and 200 K s−1, since then two separate crystallization events are observed. The prediction has been confirmed by preparation of films crystallized during ballistic cooling at different rates which then were analyzed regarding their structure using optical microscopy, X‐ray diffraction and calorimetry. The study is completed by discussion of implications of twofold non‐isothermal crystallization for structure evolution in polymer processing, as well as by providing information that such behavior is not only typical for polyamide 11 but also for isotactic polypropylene or poly(butylene terephthalate) as two further examples. © 2018 Society of Chemical IndustryKeywords
Funding Information
- Ministry of Education and Science of the Russian Federation (14.Y26.31.0019)
This publication has 69 references indexed in Scilit:
- Design, performance and analysis of thermal lag of the UFS1 twin-calorimeter chip for fast scanning calorimetry using the Mettler-Toledo Flash DSC 1Thermochimica Acta, 2011
- Temperature calibration and electrical characterization of the differential scanning calorimeter chip UFS1 for the Mettler-Toledo Flash DSC 1Thermochimica Acta, 2011
- The Flash DSC 1, a power compensation twin-type, chip-based fast scanning calorimeter (FSC): First findings on polymersThermochimica Acta, 2011
- Confined crystallization phenomena in immiscible polymer blends with dispersed micro-and nanometer sized PA6 droplets part 4: polymorphous structure and (meta)-stability of PA6 crystals formed in different temperature regionsPolymer, 2005
- Melting and reorganization of poly(ethylene terephthalate) on fast heating (1000 K/s)Polymer, 2004
- Thermal analysis and calorimetry beyond 2000: challenges and new routesThermochimica Acta, 2000
- Influence of Annealing on Structure of Nylon 11Macromolecules, 2000
- Formation of spherulities in polyamides. IV. Even–odd polyamides and poly(ω‐aminocarboxylic acids)Journal of Polymer Science Part A-2: Polymer Physics, 1969
- Effect of spherulites on the mechanical properties of nylon 66Journal of Applied Polymer Science, 1959
- VII. Scala graduum calorisPhilosophical Transactions of the Royal Society of London, 1701