Rolling Contact Fatigue Performance of Vibro-Mechanical Textured Surfaces
Authors:
- 16 July 2010
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 53 (4) , 610-620
Abstract
The rolling contact fatigue (RCF) performance of vibro-mechanical textured surfaces in a point elastohydrodynamic lubrication (EHL) condition is investigated. Two dimple designs, small (100 μ m × 100 μ m) and large (240 μ m × 100 μ m), are compared with a nontextured sample. Experimental RCF tests show that the textured surfaces exhibit a significantly reduced number of cycles to failure compared with the nontextured sample for the high load, pure rolling conditions evaluated. In order to understand these results, numerical models are used to calculate the lubrication and contact pressure conditions and the subsurface stress distribution. The fatigue failure trends observed experimentally are compared with the simulation results with good agreement. It is determined that RCF performance is related to the presence and size of the generated dimple.Keywords
This publication has 27 references indexed in Scilit:
- Effect of Surface Texturing on Very Thin Film EHD Lubricated ContactsTribology Transactions, 2008
- Testing piston rings with partial laser surface texturing for friction reductionWear, 2006
- Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered SurfacesJournal of Tribology, 2005
- The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contactTribology International, 2005
- State of the Art in Laser Surface TexturingJournal of Tribology, 2005
- Influence of surface texture on boundary lubricated sliding contactsTribology International, 2003
- Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in waterTribology International, 2003
- Surface Feature Effects in Starved Circular EHL ContactsJournal of Tribology, 2001
- Effects of surface defects on rolling contact fatigue of 60/40 brassWear, 1999
- On Mechanisms of Fatigue Life Enhancement by Surface Dents in Heavily Loaded Rolling Line ContactsTribology Transactions, 1997