Power Generation and Electrochemical Analysis of Biocathode Microbial Fuel Cell Using Graphite Fibre Brush as Cathode Material
- 29 September 2009
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 9 (5) , 588-596
Abstract
To improve cathodic efficiency and sustainability of microbial fuel cell (MFC), graphite fibre brush (GFB) was examined as cathode material for power production in biocatalysed‐cathode MFC. Following 133‐h mixed culturing of electricity‐producing bacteria, the MFC could generate a reproducible voltage of 0.4 V at external resistance (REX) of 100 Ω. Maximum volumetric power density of 68.4 W m–3 was obtained at a current density of 178.6 A m–3. Upon aerobic inoculation of electrochemically active bacteria, charge transfer resistance of the cathode was decreased from 188 to 17 Ω as indicated by electrochemical impedance spectroscopy (EIS) analysis. Comparing investigations of different cathode materials demonstrated that biocatalysed GFB had better performance in terms of half‐cell polarisation, power and Coulombic efficiency (CE) over other tested materials. Additionally, pH deviation of electrolyte in anode and cathode was also observed. This study provides a demonstration of GFB used as biocathode material in MFC for more efficient and sustainable electricity recovery from organic substances.Keywords
This publication has 41 references indexed in Scilit:
- Accelerated start-up of two-chambered microbial fuel cells: Effect of anodic positive poised potentialElectrochimica Acta, 2009
- Electricity production during the treatment of real electroplating wastewater containing Cr6+ using microbial fuel cellProcess Biochemistry, 2008
- Biochemical evaluation of bioelectricity production process from anaerobic wastewater treatment in a single chambered microbial fuel cell (MFC) employing glass wool membraneBiosensors and Bioelectronics, 2008
- The use of electrochemical impedance spectroscopy (EIS) in the evaluation of the electrochemical properties of a microbial fuel cellBioelectrochemistry, 2008
- A microbial fuel cell using permanganate as the cathodic electron acceptorJournal of Power Sources, 2006
- Microbial Fuel Cells: Methodology and TechnologyEnvironmental Science & Technology, 2006
- Catalysis of oxygen reduction in PEM fuel cell by seawater biofilmElectrochemistry Communications, 2005
- Extracellular electron transfer via microbial nanowiresNature, 2005
- Graphite electrodes as electron donors for anaerobic respirationEnvironmental Microbiology, 2004
- A Generation of Microbial Fuel Cells with Current Outputs Boosted by More Than One Order of MagnitudeAngewandte Chemie International Edition, 2003