Durability of thermally modified timber from industrial-scale processes in different use classes: Results from laboratory and field tests
- 1 March 2007
- journal article
- research article
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 2 (1) , 4-14
Abstract
Material from four common European processes of industrial heat treatment of timber was examined comparatively with reference to biological laboratory standard tests and field tests in soil contact and above ground. The thermally modified timber (TMT) used in the study was: Plato wood from the Netherlands, ThermoWood from Finland, New Option Wood (NOW) from France, and oil–heat-treated wood (OHT) produced in Germany. Tests of resistance to basidiomycetes (EN 113, 1996) and tests of resistance to soft rotting microfungi and other soil-inhabiting microorganisms (EN 807, 1997) showed substantially lower mass losses of TMT compared with controls. Only slight differences in mass loss were found between the four thermally modified materials. Based on results from laboratory standard tests all tested heat-treated materials were classified as durable to moderately durable [durability class (DC) 2–4], analogous to the classification of natural durability (EN 350-1, 1994). In contrast, the classification of TMT samples after 5.5 years’ exposure in soil contact, in accordance with EN 252 ( 1990 European Committee for Standardization ( 1990 ) EN 252. Wood preservatives. Field test methods for determining the relative protective effectiveness in ground contact. [Google Scholar] ), was slightly durable to not durable (DC 4–5), whereas the classification obtained after 5.5 years’ exposure in double layers in European hazard class (EHC) 3 (EN 335-1, 1992 European Committee for Standardization ( 1992 ) EN 335-1. Durability of wood and wood-based products—Definition of use classes with regard to biological attack—Part 1: General. [Google Scholar] ) was very durable to moderately durable (DC 1–3). On the basis of 5.5 years’ field testing, thermally modified material (independent of the treatment process and supplier) appears not to be suitable for in-ground contact application. However, the suitability of TMT for use out of ground in EHC 3 was ascertained and is recommended.Keywords
This publication has 2 references indexed in Scilit:
- Decay-influencing factors: A basis for service life prediction of wood and wood-based productsWood Material Science & Engineering, 2006
- Vergütung von Holz durch Anwendung einer Öl-HitzebehandlungEuropean Journal of Wood and Wood Products, 2000