New reconstruction method for x-ray testing of multilayer printed circuit board
Authors:
- 1 May 2010
- journal article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 49 (5) , 056501-6
Abstract
For multilayer printed circuit board (PCB) and large-scale integrated circuit (LIC) chips, nondestructive testing of the inner structure and welding defects is very important for circuit diagram reverse design and manufacturing quality control. The traditional nondestructive testing of this kind of plate-like object is digital radiography (DR), which can provide only images with overlapped information, so it is difficult to get a full and accurate circuit image of every layer and the position of the defects using the DR method. At the same time, traditional computed tomography scanning methods are also unable to resolve this problem. A new reconstruction method is proposed for the nondestructive testing of plate-like objects. With this method, x rays irradiate the surface of the reconstructed object at an oblique angle, and a series of projection images are obtained while the object is rotating. Then, through a relevant preprocessing method on the projections and a special reconstructing algorithm, cross sections of the scanning region are finally obtained slice by slice. The experimental results prove that this method satisfactorily addresses the challenges of nondestructive testing of plate-like objects such as PCB or LIC.Keywords
This publication has 11 references indexed in Scilit:
- Three-dimensional x-ray laminography as a tool for detection and characterization of BGA package defectsIEEE Transactions on Components and Packaging Technologies, 2002
- Micro-CT for nondestructive 3D reconstruction of MEMS and sensors2001
- Exact (spiral+circles) scan region-of-interest cone beam reconstruction via backprojectionIEEE Transactions on Medical Imaging, 2000
- X-ray computed laminography: an approach of computed tomography for applications with limited accessNuclear Engineering and Design, 1999
- A cone-beam reconstruction algorithm for circle-plus-arc data-acquisition geometryIEEE Transactions on Medical Imaging, 1999
- Spiral CT: current status and future directions1997
- Error analysis on a generalized Feldkamp's cone‐beam computed tomography algorithmScanning, 1995
- Three-dimensional image reconstruction by digital tomo-synthesis using inverse filteringIEEE Transactions on Medical Imaging, 1993
- Practical cone-beam algorithmJournal of the Optical Society of America A, 1984
- An Inversion Formula for Cone-Beam ReconstructionSIAM Journal on Applied Mathematics, 1983