Process optimization of microwave irradiation‐aided transesterification of kariya seed oil by Taguchi orthogonal array: pawpaw trunk as a novel biocatalyst
Authors:
- 9 February 2021
- journal article
- research article
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 15 (4) , 1006-1020
Abstract
This study investigated the potential application of an active biocatalyst from pawpaw (Carica papaya) trunk for the direct microwave irradiation‐aided transesterification of kariya (Hildegardia barteri) seed oil (KSO) with methanol to obtain biodiesel. The transesterification process involved was modeled, and the effects of the essential process input variables on the kariya seed oil methyl ester (KSOME) yield were examined, followed by the optimization of the input variables to maximize the KSOME yield, using the Taguchi orthogonal array design method. The biocatalyst was produced with a calcination process in a muffle furnace at 200–1000 °C, and each sample obtained was characterized by a scanning electron microscope equipped with energy‐dispersive X‐ray spectroscopy (SEM–EDX) to determine the best temperature. The calcined pawpaw trunk ash (CPTA) produced at the best temperature of 400 °C was further characterized using X‐ray diffraction (XRD), Fourier‐transform infrared (FTIR) spectroscopy, and physisorption analyses. The CPTA at 400 °C produced a strong catalytic activity due to its morphology, metallic composition (K (23.85%), and Ca (15.40%)), crystalline structure, the average pore size of 32.2 nm, and a surface area of 0.64 m2 g−1. The best operating conditions established for the transesterification process were a methanol / KSO molar ratio of 10.5:1, CPTA loading of 0.5 wt%, microwave heating power of 300 W, and reaction time of 2 min, with a maximum KSOME yield of 98.50 ± 0.60 wt%. The quality of the KSOME produced satisfied the American standard specifications for biodiesel. Both KSO and pawpaw trunk could serve as inexpensive feedstock for sustainable and renewable production of biodiesel. The intensification of the transesterification process using microwave irradiation drastically shortened the reaction time needed for maximum biodiesel yield. © 2021 Society of Chemical Industry and John Wiley & Sons, LtdKeywords
Funding Information
- Tertiary Education Trust Fund (TETFUND/DESS/RP/Vol. V/2014/4)
This publication has 48 references indexed in Scilit:
- Sustainable Biodiesel Synthesis from Honne-Rubber-Neem Oil Blend with a Novel Mesoporous Base Catalyst Synthesized from a Mixture of Three AgrowastesCatalysts, 2020
- Biodiesel production from waste cotton-seed cooking oil using microwave-assisted transesterification: Optimization and kinetic modelingRenewable and Sustainable Energy Reviews, 2019
- Optimization of microwave-assisted biodiesel production from Papaya oil using response surface methodologyRenewable Energy, 2019
- A review on recent advancement in catalytic materials for biodiesel productionRenewable and Sustainable Energy Reviews, 2015
- Modeling and optimization of Thevetia peruviana (yellow oleander) oil biodiesel synthesis via Musa paradisiacal (plantain) peels as heterogeneous base catalyst: A case of artificial neural network vs. response surface methodologyIndustrial Crops and Products, 2014
- Production and comparative fuel properties of biodiesel from non-edible oils: Jatropha curcas, Sterculia foetida and Ceiba pentandraEnergy Conversion and Management, 2013
- Overview properties of biodiesel diesel blends from edible and non-edible feedstockRenewable and Sustainable Energy Reviews, 2013
- Microwave energy potential for biodiesel productionSustainable Chemical Processes, 2013
- Microwave irradiation-assisted transesterification of soybean oil to biodiesel catalyzed by nanopowder calcium oxideFuel, 2011
- Microwave assisted organic synthesis—a reviewTetrahedron, 2001