Calibration of Sensor Network for Outdoor Measurement of PM2.5 on High Wood-Heating Smoke in Temuco City
Open Access
Abstract
In order to ascertain the spatial and temporal changes in the air quality in Temuco City, Chile, we created and installed a network of inexpensive sensors to detect PM2.5 particulate matter. The 21 measurement points deployed were based on a low-cost Sensiron SPS30 sensor, complemented with temperature and humidity sensors, an Esp32 microcontroller card with LoRa and WiFi wireless communication interface, and a solar charging unit. The units were calibrated using an airtight combustion chamber with a Grimm 11-E as a reference unit. The calibration procedure fits the parameters of a calibration model to map the raw low-cost particle-material measurements into reliable calibrated values. The measurements showed that the concentrations of fine particulate material recorded in Temuco present a high temporal and spatial variability. In critical contamination episodes, pollution reaches values as high as 354 µg/m, and at the same time, it reaches 50 µg/m in other parts of the city. The contamination episodes show a similar trend around the city, and the peaks are in the time interval from 07:00 PM to 1:00 AM. In the winter, this time of day coincides with when families are usually home and there are low temperatures outside.
Keywords
Funding Information
- BID-FOMIN-LAB, SMARTCITY IN A BOX (IDI18-0003, ANID/FONDECYT 1220178, FB210024)
- SMARTCITY IN A BOX (IDI18-0003, ANID/FONDECYT 1220178, FB210024)
- ANID—Basal funding for Scientific and Technological Center of Excellence, IMPACT (Center of Interventional Medicine for Precision and Advanced Cellular Therapy) (IDI18-0003, ANID/FONDECYT 1220178, FB210024)
This publication has 38 references indexed in Scilit:
- Long-term field evaluation of the Plantower PMS low-cost particulate matter sensorsEnvironmental Pollution, 2019
- Mapping Urban Functional Zones by Integrating Very High Spatial Resolution Remote Sensing Imagery and Points of Interest: A Case Study of Xiamen, ChinaRemote Sensing, 2018
- Sensing of Indoor Air Quality—Characterization of Spatial and Temporal Pollutant Evolution Through Distributed SensingFrontiers in Built Environment, 2018
- IoT deployment for city scale air quality monitoring with Low-Power Wide Area Networks2018
- Indoor PM2.5 in an urban zone with heavy wood smoke pollution: The case of Temuco, ChileEnvironmental Pollution, 2018
- Spatiotemporal distribution of indoor particulate matter concentration with a low-cost sensor networkBuilding and Environment, 2018
- Development of an environmental chamber for evaluating the performance of low-cost air quality sensors under controlled conditionsAtmospheric Environment, 2017
- Mapping urban air quality in near real-time using observations from low-cost sensors and model informationEnvironment International, 2017
- Ambient and laboratory evaluation of a low-cost particulate matter sensorEnvironmental Pollution, 2017
- Assessing the stability of annual temperatures for different urban functional zonesBuilding and Environment, 2013