Strain monitoring using distributed fiber optic sensors embedded in carbon fiber composites
Authors:
- 27 March 2018
- conference paper
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10598, 105980I
Abstract
A distributed fiber optic strain sensor based on Rayleigh backscattering, embedded in a fiber-reinforced polymer composite, has been demonstrated. The optical frequency domain reflectometry (OFDR) technique was used to analyze the backscattered signal. The shift in the Rayleigh backscattered spectrum (RBS) was observed to be linear to the change in strain of the composite material. The sensor (standard single-mode fiber) was embedded between the layers of the composite laminate. A series of tensile loads were applied to the laminate using an Instron testing machine, and the corresponding strain distribution of the laminate was measured. The results show a linear response indicating a seamless integration of the optic fiber in the composite material and a good correlation with the electrical-resistance strain gauge results. In this study, distributed strain measurements in a composite laminate were successfully obtained using an embedded fiber optic sensor.Keywords
This publication has 25 references indexed in Scilit:
- Composite materials with embedded photonic crystal fiber interferometric sensorsSensors and Actuators A: Physical, 2012
- The influence of thermal expansion of a composite material on embedded polarimetric sensorsSmart Materials and Structures, 2011
- Flat-Cladding Fiber Bragg Grating Sensors for Large Strain Amplitude Fatigue TestsSensors, 2010
- A reconstruction technique for long-range stimulated Brillouin scattering distributed fibre-optic sensors: experimental resultsMeasurement Science and Technology, 2005
- Fatigue testing of a composite propeller blade using fiber-optic strain sensorsIEEE Sensors Journal, 2003
- Characterization of Fiber Optic Sensors for Structural Health MonitoringJournal of Composite Materials, 2002
- Summary report of the structural health-monitoring project for smart composite structure systemsAdvanced Composite Materials, 2001
- Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensorsSensors and Actuators A: Physical, 2000
- Measurement and analysis of impact-induced strain using extrinsic Fabry-Pérot fiber optic sensorsSmart Materials and Structures, 1998
- Review of the Mechanics of Embedded Optical SensorsJournal of Composites Technology and Research, 1995