Effects of surface topography on hydrodynamic performance of liquid film seals considering cavitation
Authors:
- Mu-Ming HaoMHMu-Ming Hao
- Yun-Lei WangYWYun-Lei Wang
- Zhen-Tao LiZLZhen-Tao Li
- Xin-Hui SunXSXin-Hui Sun
- 4 July 2018
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 70 (6) , 984-992
Abstract
Purpose: The purpose of this paper is to investigate the effects of surface topography, including surface roughness, circumferential waviness and radial taper, on hydrodynamic performance of liquid film seals considering cavitation. Design/methodology/approach: A mathematical model of liquid film seals with surface topography was established based on the mass-conservative algorithm. Liquid film governing equation was discretized by the finite control volume method and solved by the Gauss–Seidel relaxation iterative algorithm, and the hydrodynamic performance parameters of liquid film seals were obtained considering surface roughness, circumferential waviness and radial taper separately. Findings: The results indicate that the values of load-carrying capacity and frication torque are affected by the surface topography in varying degrees, but the effect is limited. Originality/value: The results presented in the study are expected to aid in determining the optimum value of structural parameters for the optimum seal performance because of the realistic model which considers both surface topography and cavitation.Keywords
This publication has 20 references indexed in Scilit:
- Thermohydrodynamic Analysis of Spiral Groove Mechanical Face Seal for Liquid ApplicationsJournal of Tribology, 2012
- Performance Analysis of Full-Film Textured Surfaces With Consideration of Roughness EffectsJournal of Tribology, 2011
- A Computational Method for Cavitation in a Wavy Mechanical SealJournal of Tribology, 1992
- Surface Roughness Effects in Hydrodynamic Lubrication: The Flow Factor MethodJournal of Lubrication Technology, 1983
- Finite-Length Solutions for Rotordynamic Coefficients of Turbulent Annular SealsJournal of Lubrication Technology, 1983
- Hydrodynamic Lubrication in Wavy Contacting Face Seals—A Two Dimensional ModelJournal of Lubrication Technology, 1981
- Centrifugal Effects in Thrust Bearings and Seals Under Laminar ConditionsJournal of Lubrication Technology, 1981
- Application of Average Flow Model to Lubrication Between Rough Sliding SurfacesJournal of Lubrication Technology, 1979
- Behavior of Hydrostatic and Hydrodynamic Noncontacting Face SealsJournal of Lubrication Technology, 1968
- Numerical Analysis of the Gas-Lubricated Spiral-Groove Thrust Bearing-CompressorJournal of Lubrication Technology, 1967