Compact Single-Feed Dual-Mode Antenna for Active RFID Tag Application
- 9 September 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 63 (11) , 5190-5194
Abstract
This communication proposes a compact single-feed dual-mode antenna for active radio-frequency identification (RFID) tag application. The proposed antenna consists of a slotted patch on an FR4 substrate, a feeding microstrip line, and a foam spacer with a volume of only 60 mm × 50.3 mm × 6 mm (0.48λ 0 × 0.40λ 0 × 0.048λ 0 , where λ 0 is the wavelength at the center frequency). It operates as a dipole in free space and as a patch when placed on a metallic surface. A prototype that can provide an impedance bandwidth of 390 MHz (2.28-2.67 GHz) in free space and 470 MHz (2.32-2.79 GHz) on a metallic surface is built and measured. The measured radiation patterns, peak gains, and radiation efficiencies in these two scenarios are provided.Keywords
Funding Information
- National Basic Research Program of China (2013CB329002)
- National High Technology Research and Development Program of China (2011AA010202)
- National Natural Science Foundation of China (61371012)
- National Science and Technology Major Project of the Ministry of Science and Technology of China (2013ZX03003008-002)
- China Postdoctoral Science Foundation (2013M530046)
This publication has 13 references indexed in Scilit:
- Planar Broadband Tag Antenna Mounted on the Metallic Material for UHF RFID SystemIEEE Antennas and Wireless Propagation Letters, 2011
- ISS-TCA: An Identified Slot Scan-Based Tag Collection Algorithm for Performance Improvement in Active RFID SystemsIEEE Transactions on Industrial Electronics, 2011
- Planar inverted-E antenna for UHF RFID tag on metallic objects with bandwidth enhancementElectronics Letters, 2010
- Broadband Capacitively Coupled Patch Antenna for RFID Tag Mountable on Metallic ObjectsIEEE Antennas and Wireless Propagation Letters, 2010
- Quasi-Isotropic X-Band Inverted-F Antenna for Active RFID TagsIEEE Antennas and Wireless Propagation Letters, 2008
- Design of planar RFID tag antenna for metallic objectsElectronics Letters, 2008
- Asymmetric dipole antenna suitable for active RFID tagsElectronics Letters, 2008
- Fork-shaped RFID tag antenna mountable on metallic surfacesElectronics Letters, 2007
- Compact structure of UHF band RFID tag antenna mountable on metallic objectsMicrowave and Optical Technology Letters, 2007
- RFID tag antenna using two‐shorted microstrip patches mountable on metallic objectsMicrowave and Optical Technology Letters, 2006