Adsorptive removal of Ni(II) from aqueous solution on 110-H resin: optimization through response surface methodology
Open Access
- 1 May 2016
- journal article
- research article
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (23) , 10710-10722
Abstract
The Box–Behnken design of the response surface methodology was employed to optimize three most important adsorption parameters (initial Ni(II) concentration, pH, and adsorption temperature) and to investigate the interactive effects of these variables on Ni(II) adsorption capacity of 110-H resin. According to analysis of variance and response surface analyses, the experiment data were excellently fitted to the quadratic model. The corresponding optimal parameters of adsorption process are listed as following: temperature at 35°C, initial pH of 6.57, and initial Ni(II) concentration of 0.33 mg/mL. Under optimum adsorption conditions, the adsorption capacity of Ni(II) was 188.5 mg/g, in well accordance with the predicted value by the model (192.88 mg/g). The adsorption kinetics and equilibrium data were well fitted to the pseudo-second-order model and the Langmuir isotherm model, respectively. Thermodynamic parameters (ΔG, ΔS, and ΔH) suggested that the adsorption process was endothermic and spontaneous in nature. Desorption study revealed that Ni(II) can be effectively eluted by 2.0 mol/L HCl solution, and the recovery was 100%. The characterization by Fourier Transform infrared and SEM was performed. Meanwhile, the 110-H resin has been successfully applied in the removal of Ni(II) in natural water samples with satisfactory results.Keywords
This publication has 36 references indexed in Scilit:
- Synthesis and Characterization of a Few Amino-Functionalized Copolymeric Resins and Their Environmental ApplicationsIndustrial & Engineering Chemistry Research, 2012
- Biodiesel production from vegetable oil using heterogenous acid and alkali catalystFuel, 2010
- Sorption of Ni(II) ions from aqueous solution by Lewatit cation-exchange resinJournal of Hazardous Materials, 2009
- Heavy metal adsorbents prepared from the modification of cellulose: A reviewBioresource Technology, 2008
- Ion-exchange of Pb2+, Cu2+, Zn2+, Cd2+, and Ni2+ ions from aqueous solution by Lewatit CNP 80Journal of Hazardous Materials, 2007
- A mechanistic study on boron rejection by sea water reverse osmosis membranesJournal of Membrane Science, 2006
- Chloride leaching and solvent extraction of cadmium, cobalt and nickel from spent nickel–cadmium, batteries using Cyanex 923 and 272Journal of Power Sources, 2006
- Adsorption characteristics of heavy metal ions onto a low cost biopolymeric sorbent from aqueous solutionsJournal of Hazardous Materials, 2006
- Removal and recovery of nickel(II) from aqueous solution by loofa sponge-immobilized biomass of Chlorella sorokiniana: characterization studiesJournal of Hazardous Materials, 2004
- Lead and nickel removal using Microspora and Lemna minorBioresource Technology, 2003