Micromachined multilayer bandpass filter at 270 GHz using dual-mode circular cavities
- 1 June 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1449-1452
Abstract
In this paper, we present a microfabricated fourth-order sub-THz WR-3.4 bandpass waveguide filter based on TM110 dual-mode circular-shaped cavity resonators. The filter operates at the center frequency of 270 GHz with fractional bandwidth of 1.85% and two transmission zeros are introduced in the upper and in the lower stopband using a virtual negative coupling. The microchip filter is significantly more compact than any previous dual-mode designs at comparable frequencies, occupying less than 1.5 mm2. Furthermore, in contrast to any previous micromachined filter work, due to its axially arranged interfaces it can be directly inserted between two standard WR-3.4 rectangular-waveguide flanges, which vastly improves system integration as compared to previous micromachined filters; in particular no custom-made split-block design is required. The cavities are etched in the handle layer of a silicon-on-insulator (SOI) wafer, and coupling is realized through rectangular slots fabricated in the SOI device layer. Couplings of the degenerate modes in one cavity are facilitated by means of small perturbations in the circular cavity shapes. The measured average return loss in the passband is -18 dB and worst-case return loss is -15 dB, and an insertion loss of only 1.5 dB was measured. The excellent agreement between measured and simulated data is facilitated by fabrication accuracy, design robustness and micromachined self-alignment geometries.Keywords
This publication has 12 references indexed in Scilit:
- A 500–750 GHz RF MEMS Waveguide SwitchIEEE Transactions on Terahertz Science and Technology, 2017
- Ka-band surface-mountable pseudo-elliptic filter in multilayer micromachined technology for on-board communication systems2016
- Silicon Micromachined Terahertz Bandpass Filter With Elliptic CavitiesIEEE Transactions on Terahertz Science and Technology, 2015
- Silicon Micromachined Canonical ${\hbox{E}}$-Plane and ${\hbox{H}}$-Plane Bandpass Filters at the Terahertz BandIEEE Microwave and Wireless Components Letters, 2013
- Micromachined Terahertz Rectangular Waveguide Bandpass Filter on Silicon-SubstrateIEEE Microwave and Wireless Components Letters, 2012
- WR-3 Band Waveguides and Filters Fabricated Using SU8 Photoresist Micromachining TechnologyIEEE Transactions on Terahertz Science and Technology, 2012
- D-Band Micromachined Silicon Rectangular Waveguide FilterIEEE Microwave and Wireless Components Letters, 2012
- Generalized TM Dual-Mode Cavity FiltersIEEE Transactions on Microwave Theory and Techniques, 2011
- A New Class of Waveguide Dual-Mode Filters Using TM and Nonresonating ModesIEEE Transactions on Microwave Theory and Techniques, 2010
- TM dual-mode pseudoelliptic filters using nonresonating modes2010