Analysis and Design of 10-MHz Capacitive Power Transfer With Multiple Independent Outputs for Low-Power Portable Devices
- 3 November 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (1) , 149-159
Abstract
This article proposes a multiple-output capacitive power transfer (CPT) system using the $LCCL$ compensation network for low-power (< 20 W) battery charging application, e.g., consumer electronics. For CPT, reliable operation is still a challenge under a wide range of receiver configurations due to the variations in receiver position or load impedance. In this article, employing the constant-voltage property of the $LCCL$ network, the proposed multiple-output CPT system is able to achieve output independence among different receivers. Moreover, based on the first-harmonic approximation (FHA), a design method is proposed and studied in depth to maintain minimal current stress on power devices and inductors, as well as zero-voltage switching (ZVS) within a defined range. The proposed method considers the impact of component value ratios to limit the resonant current magnitude and determine the phase angle and selects inductance values for the most efficient system operation. Finally, a constructed 10-MHz experimental prototype achieves CPT from one transmitter to three independent 5-W receivers, with plate voltages less than 55 V. The measured power efficiency of the prototype is up to 83.6% at the 15-W output.Keywords
Funding Information
- DTU PoC (56480)
- Discovery (99985-31)
This publication has 32 references indexed in Scilit:
- Six-Plate Capacitive Coupler to Reduce Electric Field Emission in Large Air-Gap Capacitive Power TransferIEEE Transactions on Power Electronics, 2017
- Capacitive Power Transfer System With a Mixed-Resonant Topology for Constant-Current Multiple-Pickup ApplicationsIEEE Transactions on Power Electronics, 2016
- A review of wireless power transfer for electric vehicles: Prospects to enhance sustainable mobilityApplied Energy, 2016
- Wireless Power Transfer by Electric Field Resonance and Its Application in Dynamic ChargingIEEE Transactions on Industrial Electronics, 2016
- Z-Impedance Compensation for Wireless Power Transfer Based on Electric FieldIEEE Transactions on Power Electronics, 2016
- A 4-Plate Compact Capacitive Coupler Design and LCL-Compensated Topology for Capacitive Power Transfer in Electric Vehicle Charging ApplicationsIEEE Transactions on Power Electronics, 2016
- Wireless Power for Vehicle Lightweighting, Reducing Costs, and Improving Manufacturing Efficiencies: An Analysis of Resonant Capacitive Coupling and its Ability to Reduce Vehicle Weight and the Cost of Vehicle Manufacturing and Maintenance2015
- A Double-Sided LCLC-Compensated Capacitive Power Transfer System for Electric Vehicle ChargingIEEE Transactions on Power Electronics, 2015
- Biologically inspired coupling pixilation for position independence in capacitive power transfer surfaces2015
- A Capacitively Coupled Contactless Matrix Charging Platform With Soft Switched Transformer ControlIEEE Transactions on Industrial Electronics, 2011