Improvement of the Biodegradation Property and Biomineralization Ability of Magnesium–Hydroxyapatite Composites with Dicalcium Phosphate Dihydrate and Hydroxyapatite Coatings
- 6 April 2016
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 2 (5) , 818-828
Abstract
The application of calcium phosphate reinforced magnesium matrix composites has not achieved the expected effect to control the degradation rate of magnesium so far. Therefore, in order to enhance the corrosion resistance and further develop the surface bioactivity of the composites to meet specific requirements of bone tissue engineering applications, biocompatible dicalcium phosphate dihydrate (DCPD) and hydroxyapatite (HA) coatings have been deposited on homemade HA/Mg composites using a simple conversion coating method and a subsequent alkali post-treatment, respectively. The conversion coating mechanism was studied by comparing coating processes on the composites, pure Mg, and an AZ60 Mg alloy. Electrochemical results showed that polarization resistance of the optimum DCPD and HA coatings was about 15 and 65 times higher than that of the composites, respectively. Immersion tests in simulated body fluid revealed that both coatings could supply improved corrosion resistance and biomineralization ability for the HA/Mg composites.Keywords
Funding Information
- National Natural Science Foundation of China (31070841)
This publication has 52 references indexed in Scilit:
- Preparation and characterization of HA microflowers coating on AZ31 magnesium alloy by micro-arc oxidation and a solution treatmentApplied Surface Science, 2013
- In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgyActa Biomaterialia, 2010
- The in vitro corneal biocompatibility of hydroxyapatite coated carbon meshBiomaterials, 2009
- In vitro precipitation of electrodeposited calcium-deficient hydroxyapatite coatings on Ti6Al4V substrateMaterials Characterization, 2008
- Biodegradable magnesium–hydroxyapatite metal matrix compositesBiomaterials, 2007
- Biocompatibility and resorption of a brushite calcium phosphate cementBiomaterials, 2005
- In vivo corrosion of four magnesium alloys and the associated bone responseBiomaterials, 2005
- Effect of dual ion implantation of calcium and phosphorus on the properties of titaniumBiomaterials, 2005
- Dissolution properties of calcium phosphate granules with different compositions in simulated body fluidJournal of Biomedical Materials Research Part A, 2003
- Review of corrosion and corrosion control of magnesium alloys and compositesJournal of Materials Engineering, 1989