Effect of fiber content and stress–strength ratio on the creep of basalt fiber–reinforced alkali‐activated slag concrete
- 9 December 2021
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 23 (1) , 382-394
Abstract
Alkali‐activated materials are increasingly being used in practical applications as potential alternatives to Portland cement. If alkali‐activated slag (AAS) is to be applied to prestressed engineering and large‐size structures, it is necessary to study the creep performance of AAS. Existing studies have found that the creep of AAS concrete is larger than that of ordinary Portland cement (OPC) concrete, and adding fiber is an effective way to overcome this defect. In this study, we investigated the creep of basalt fiber–reinforced AAS (FRAAS) concrete for fiber contents ranging from 0% to 0.9% (by volume) at a stress–strength ratio of 0–0.6. After analyzing the experimental results, it was found that the basalt FRAAS concrete had no obvious linear creep range. It was observed that with an increase in the fiber content, the inhibition effect of fiber on creep became stronger initially and then weaker. The inhibitory effect of fiber on creep was strengthened by the increase in the stress–strength ratio. The creep coefficient showed no obvious change when the fiber content was in the range of 0%–0.9%. Based on the existing OPC concrete creep models, a method for predicting the creep of basalt FRAAS concrete was proposed.Keywords
Funding Information
- National Natural Science Foundation of China (51478142)
This publication has 28 references indexed in Scilit:
- A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – A guide for Civil EngineerConstruction and Building Materials, 2013
- Creep and shrinkage of recycled aggregate concreteConstruction and Building Materials, 2009
- Role of fibers in controlling unrestrained expansion and arresting cracking in Portland cement concrete undergoing alkali–silica reactionCement and Concrete Research, 2004
- Modeling of the influence of fibers on creep of fiber reinforced cementitious compositeComposites Science and Technology, 2003
- Alkali-activated slag mortarsCement and Concrete Research, 1999
- Workability and mechanical properties of alkali activated slag concreteCement and Concrete Research, 1999
- Creep and shrinkage prediction model for analysis and design of concrete structures— model B3Materials and Structures, 1995
- Compressive creep and shrinkage of steel fibre reinforced concreteInternational Journal of Cement Composites and Lightweight Concrete, 1989
- Compression creep behaviour of steel fibre reinforced cement compositesMaterials and Structures, 1986
- A theory for the creep of steel fibre reinforced cement matrices under compressionJournal of Materials Science, 1985