Kinetic studies and process analysis of the reactive compatibilization of nylon 6/polypropylene blends
Authors:
- 1 December 1994
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 34 (23) , 1720-1730
Abstract
This article describes a study on the reactive compatibilization of nylon 6 (N6) and polypropylene (PP) blends through a functionalized PP. A graft copolymer was formed in‐situ by reacting an acid modified PP with N6 during blend compounding. The compatibilization reactions are studied in detail. Kinetics were estimated by means of experiments in a batch mixer. Three time constants were estimated, corresponding to (a) reactions, (b) melting of polymers, and (c) melt mixing. The effects of temperature and rotor speed on the reaction kinetics were also measured. There was a substantial increase in initial reaction rate, as the rotor speed was increased. Increasing the temperature did not significantly affect the reaction rate. Process parameters important for such a reactive compatibilization process were identified by statistically designed experiments in a co‐roatating intermeshing twin‐screw extruder. Screw speed, presence of venting, and sequence of feeding were shown to have a noticeable effect on the reactive compatibilization process during continuous compounding.Keywords
This publication has 23 references indexed in Scilit:
- Blends of nylon 6 with a polyethylene functionalized by photooxidationJournal of Applied Polymer Science, 1990
- Compatibilizing Agents: Structure and Function in PolyblendsJournal of Macromolecular Science: Part A - Chemistry, 1989
- Viscoelastic Properties and Morphology of Two‐Phase Polypropylene/Polyamide 6 Blends in the Melt. Interpretation of Results with an Emulsion ModelJournal of Rheology, 1989
- Processing‐morphology relationships of compatibilized polyolefin/polyamide blends. Part I: The effect of an lonomer compatibilizer on blend morphologyPolymer Engineering & Science, 1988
- Morphological and mechanical properties of extruded polypropylene/nylon-6 blendsJournal of Materials Science, 1988
- Studies on the glass transition of blends of nylon‐6 and polyacrylic acidJournal of Applied Polymer Science, 1988
- Polypropylene/nylon 6 blends: Phase distribution morphology, rheological measurements, and structure development in melt spinningJournal of Applied Polymer Science, 1983
- Hydrolytic polymerization of caprolactam. I. Hydrolysis—polycondensation kineticsJournal of Polymer Science Part A-1: Polymer Chemistry, 1970
- Equilibria in solid phase polyamidationJournal of Polymer Science Part B: Polymer Letters, 1964
- On the mechanism of the polymerization of ε‐caprolactam. IV. Polymerization in the presence of water and either an amine or a carboxylic acidJournal of Polymer Science, 1960