Optimal Selection of Active Jet Parameters for a Ducted Tail Wing Aimed at Improving Aerodynamic Performance
Open Access
Abstract
The foldable tail of the box-type launch vehicle poses a risk of mechanical jamming during the launch process, which is not conducive to the smooth completion of the flight mission. The integrated nonfolding ducted tail proposed in this article can solve the problem of storing the tail in the launch box. Moreover, traditional mechanical control surfaces have been eliminated, and active jet control has been adopted to control the pitch direction of the flight attitude, which can improve the structural reliability of the tail wing. By studying the effects of parameters such as momentum coefficient, jet hole position, jet hole height, and jet angle on improving the aerodynamic performance of ducted tail wing, relatively good jet parameters are selected. Research has found that compared with jet hole height and jet angle, momentum coefficient and jet hole position are more effective in improving the aerodynamic performance of ducted tail wings. Under a trailing edge jet, a relatively good jet condition occurs when the jet hole height is equal to0.25% of the aerodynamic chord length, and the jet angle is equal to 0°. At this time, with the increase of the jet momentum coefficient, the effect of increasing the lift of the ducted tail wing is the best. Finally, a comparative analysis is conducted on the lift and drag characteristics between the ducted tail wing and traditional tail wing, and it is found that the ducted tail wing can generate lift at a 0° attack angle and will not stall in the high attack angle range of 12°~22°, with broad application prospects.Keywords
Funding Information
- National Key Laboratory of Science and Technology on Advanced Light-duty Gas-turbine (E31H890206)
This publication has 16 references indexed in Scilit:
- Numerical investigation of circulation control applied to flapless aircraftAircraft Engineering and Aerospace Technology, 2020
- Large Eddy simulation of a NACA0015 circulation control airfoil using synthetic jetsAerospace Science and Technology, 2018
- Fluidic Flow Control Effectors for Flight ControlAIAA Journal, 2018
- Flow Control over the Blunt Trailing Edge of Wind Turbine Airfoils Using Circulation ControlEnergies, 2018
- Active Circulation Control on the Blunt Trailing Edge Wind Turbine AirfoilAIAA Journal, 2018
- Lift Enhancement of an Airfoil and an Unmanned Aerial Vehicle by Plasma Gurney FlapsAIAA Journal, 2017
- Circulation Control as a Roll Effector for Unmanned Combat Aerial VehiclesJournal of Aircraft, 2016
- Active Flow Control on the Stingray Uninhabited Air Vehicle: Transient BehaviourAIAA Journal, 2004
- An Active Flow Circulation Controlled Flap Concept for General Aviation Aircraft Applications2002
- A flow visualization and aerodynamic force data evaluation of spanwise blowing on full and half span delta wings1989