Effect of Modeling Assumptions on the Earthquake-Induced Losses and Collapse Risk of Steel-Frame Buildings with Special Concentrically Braced Frames
- 1 September 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (9)
Abstract
This paper quantifies the collapse risk and earthquake-induced economic losses of steel-frame buildings with special concentrically braced frames designed in urban California. A probabilistic building-specific loss estimation methodology that can explicitly account for the main sources of variability related to seismic hazards and structural response is used for this purpose. It is shown that, depending on the choice of the loss metric, at seismic events with low probability of occurrence (i.e., 2% probability of occurrence in 50 years), losses because of demolition and structural collapse in steel-frame buildings with special concentrically braced frames designed in highly seismic zones may be significantly overestimated when ignoring the contribution of the composite floor and gravity framing system to the analytical model building representation. For frequent and moderately frequent seismic events (i.e., 50 and 10% probability of exceedance over 50 years of building life expectancy), acceleration-sensitive nonstructural component repairs govern building losses regardless of the analytical model representation used. For the same seismic events, an appreciable contributor to total losses in steel-frame buildings with special concentrically braced frames is structural repairs because of steel brace flexural buckling. It is suggested that dual-parameter rather than drift-based steel brace fragility curves should be used in loss computations conditioned on a single seismic intensity. Otherwise, the expected annual losses should be used as a metric for building-specific loss assessment of steel-frame buildings with special concentrically braced frames.Keywords
This publication has 42 references indexed in Scilit:
- Loss-based formulation for multiple hazards with application to residential buildingsEngineering Structures, 2012
- Effect of Nonlinearity of Frame Buildings on Peak Horizontal Floor AccelerationJournal of Earthquake Engineering, 2011
- Methodology for earthquake-induced loss estimation: An application to woodframe buildingsStructural Safety, 2009
- FRAGILITY ASSESSMENT OF SLAB-COLUMN CONNECTIONS IN EXISTING NON-DUCTILE REINFORCED CONCRETE BUILDINGSJournal of Earthquake Engineering, 2005
- Hysteretic models that incorporate strength and stiffness deteriorationEarthquake Engineering & Structural Dynamics, 2005
- Inelastic seismic response of steel bracing membersJournal of Constructional Steel Research, 2002
- Incremental dynamic analysisEarthquake Engineering & Structural Dynamics, 2001
- Earthquake‐induced floor horizontal accelerations in buildingsEarthquake Engineering & Structural Dynamics, 2001
- Seismic design of steel buildings: lessons from the 1995 Hyogo-ken Nanbu earthquakeCanadian Journal of Civil Engineering, 1996
- Performance of steel structures during the 1994 Northridge earthquakeCanadian Journal of Civil Engineering, 1995