High frequency 1-3 composite transducers fabricated from alkoxide-derived PZT fibers
Authors:
- P. LopathPLP. Lopath
- S. YoshikawaSYS. Yoshikawa
- T.R. ShroutTST.R. Shrout
- 23 November 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (10510117) , 915-918
Abstract
Research in obtaining higher frequency 1-3 composite transducers for ultrasonic imaging applications has prompted the need for finer scale composite structures. Fine scale fibers of lanthanum doped lead zirconate titanate (PLZT) were derived from a continuous alkoxide based sol-gel spinning process for incorporation into 1-3 type composites. Single fiber filaments, ranging from 10 to 60 /spl mu/m in diameter, were fabricated. Microstructural and electrical characteristics of these fibers were determined under different pyrolysis and sintering conditions to obtain high quality dense fibers with dielectric constants up to 1100. Fibers were then incorporated into 1-3 composites using an epoxy matrix with volume fractions ranging from 10 to 40%. Resonance frequencies between 15 and 40 MHz could be obtained with thickness coupling coefficients up to 70%. Transducers were fabricated using these composites and evaluated for their pulse/echo characteristics. These transducers, without optimization, had center frequencies of 40 MHz with a bandwidth of 54% and a round-trip insertion loss of 47 dB.Keywords
This publication has 8 references indexed in Scilit:
- Piezoceramics for high-frequency (20 to 100 MHz) single-element imaging transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1997
- Characterization of interdigitated electrode piezoelectric fiber composites under high electrical and mechanical loading1996
- Overview of Fine‐Scale Piezoelectric Ceramic/Polymer Composite ProcessingJournal of the American Ceramic Society, 1995
- Fabrication of high frequency spherically shaped ceramic transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1994
- Passively damped structural composite materials using resistively shunted piezoceramic fibersJournal of Materials Engineering and Performance, 1993
- Principles and applications of ultrasound backscatter microscopyIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1993
- New opportunities in ultrasonic transducers emerging from innovations in piezoelectric materials (Invited Paper)1992
- Modeling 1-3 composite piezoelectrics: thickness-mode oscillationsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1991