RF-Sputtered Vanadium Oxide Films
Authors:
- 1 January 2002
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 149 (5) , A597-A602
Abstract
Structural and electrochemical properties of radio frequency (rf)-sputtered vanadium oxide films with different thicknesses (0.175, 0.35, 0.8, 1.6, and 3.2 μm) have been investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), impedance spectroscopy, and a galvanostatic charge/discharge system. XRD and SEM studies show that change in the film thickness by deposition time has a significant influence on the crystalline phase and orientation of vanadium oxide films: cc axis oriented V6O13V6O13 phase is converted to the V2O5V2O5 phase with the abab plane perpendicular to the substrate with increasing film thickness. Similar discharge profiles are observed regardless of film thickness, whereas the first discharge capacities are higher for the thin films (∼100 μAh/cm2 μm(∼100 μAh/cm2 μm for 0.175, 0.35, and 0.8 μm) than those for the thicker films (∼82 μAh/cm2 μm(∼82 μAh/cm2 μm for 1.6 and 3.2 μm) at constant current of 40 μA/cm2.40 μA/cm2. Moreover the films with thickness of 1.6 and 3.2 μm show unstable cycle characteristics. From a long-term cycling performance for the samples with the thickness less than 0.8 μm, a large decrease in discharge capacity is observed after 1st cycle followed by almost constant value retained up to 1000th cycle. Comparison of impedance spectra for the as-prepared and the cycled 175 nm thick film reveals that there is no significant change in the charge-transfer resistance before and after cycling, indicating that capacity loss during cycling is mainly attributed to an irreversible phase transformation. However, with increasing film thickness, charge-transfer resistance at the electrolyte/electrode is found to have an influence, gradually, on the degree of capacity loss. © 2002 The Electrochemical Society. All rights reserved.Keywords
This publication has 28 references indexed in Scilit:
- In-situ X-ray diffraction of Li intercalation in sol–gel V2O5 filmsSolid State Ionics, 1999
- Li ion diffusion measurements in V2O5 and Li(Co1−xAlx)O2 thin-film battery cathodesElectrochimica Acta, 1999
- Characterization of sputtered vanadium oxide films for lithium batteriesJournal of Power Sources, 1999
- Fabrication of LiMn2O4 thin films by sol–gel method for cathode materials of microbatteryJournal of Power Sources, 1998
- Fabrication of LiV2O5 thin-film electrodes for rechargeable lithium batteriesSolid State Ionics, 1998
- Charging Capacity and Cycling Stability of VO x Films Prepared by Pulsed Laser DepositionJournal of the Electrochemical Society, 1997
- 5 Volt Plateau in LiMn2 O 4 Thin FilmsJournal of the Electrochemical Society, 1995
- Effects of lithium content on the electrochemical lithium intercalation reaction into LiNiO2 and LiCoO2 electrodesJournal of Power Sources, 1995
- Temperature dependency of the discharge and charge characteristics of electrochemical lithium insertion in V6O13Solid State Ionics, 1995
- Thin-film rechargeable lithium batteriesJournal of Power Sources, 1995