Comparison of postfault control strategies in terms of converter losses for dual three-phase machines
- 1 October 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 42, 3612-3619
Abstract
Dual three-phase machines are attractive due to advantages such as inherent fault tolerance. During postfault situation, the same magneto-motive force as in healthy operation should be maintained. Furthermore, it is also important to minimize the copper losses. Several strategies have been proposed to improve the postfault performance under open-phase fault. The maximum-torque (MT) strategy obtains the widest torque operation range (TOR) in faulty situation, but without optimizing the stator winding losses. The minimum-losses (ML) strategy minimizes the stator winding losses, at the cost of reducing the TOR. The full-range ML (FRML) strategy ensures minimum stator winding losses, for each torque value, in the whole TOR (that of the MT strategy). For the development and analysis of these strategies, only the stator winding losses were taken into account. Since the losses in a converter represent an important part of the overall system losses, they should also be considered. This paper compares the main postfault control strategies in terms of converter losses with carrier-based pulsewidth modulation (PWM) with sinusoidal references for dual three-phase machines with sinusoidally distributed windings under single open-phase fault. Furthermore, a strategy aiming to optimize both the converter and the stator copper losses is obtained, which results nearly identical to the FRML one. It is concluded that the FRML strategy is optimum in the whole TOR not only in terms of stator winding losses, but also of converter losses. Experimental results are provided.Keywords
This publication has 29 references indexed in Scilit:
- Fault-Tolerant Operation of Six-Phase Energy Conversion Systems With Parallel Machine-Side ConvertersIEEE Transactions on Power Electronics, 2015
- Comparative Study of Predictive and Resonant Controllers in Fault-Tolerant Five-Phase Induction Motor DrivesIEEE Transactions on Industrial Electronics, 2015
- Current Harmonics Compensation Based on Multiresonant Control in Synchronous Frames for Symmetrical $n$-Phase MachinesIEEE Transactions on Industrial Electronics, 2014
- A Unified Fault-Tolerant Current Control Approach for Five-Phase PM Motors With Trapezoidal Back EMF Under Different Stator Winding ConnectionsIEEE Transactions on Power Electronics, 2013
- Effect of Stator Winding Connection on Performance of Five-Phase Induction MachinesIEEE Transactions on Industrial Electronics, 2013
- Torque Control Strategy of Polyphase Permanent-Magnet Synchronous Machines With Minimal Controller Reconfiguration Under Open-Circuit Fault of One PhaseIEEE Transactions on Industrial Electronics, 2011
- A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real TimeIEEE Transactions on Industrial Electronics, 2011
- Fault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMFIEEE Transactions on Industrial Electronics, 2010
- Modeling and Control of Six-Phase Symmetrical Induction Machine Under Fault Condition Due to Open PhasesIEEE Transactions on Industrial Electronics, 2008
- Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet MotorIEEE Transactions on Industry Applications, 2007