Manufacturing Tolerance Analysis of an MMI-Based 90$^{ \circ}$ Optical Hybrid for InP Integrated Coherent Receivers
Open Access
- 20 February 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 5 (2) , 7900512
Abstract
A numerical study of the impact that manufacturing tolerances have on the performance of an InP 4 × 4 MMI working as a 90° optical hybrid is presented, including simultaneous variations of width, thickness, and refractive index over the C and L bands. Simulation results for different figures of merit, such as optical common-mode rejection ratios (CMRRs) and phase errors, are provided for both nominal and worst case scenarios. Additionally, system simulations are performed to compute imbalance-induced power penalty. Our results indicate that the combined effect of realistic foundry tolerances on device performance is significant. In particular, a fourfold reduction is predicted between nominal (≃40 nm) and worst cases (≃10 nm) when optical CMRRs and phase errors are compared against Optical Internetworking Forum specifications. By contrast, a much greater bandwidth is expected at the system level (≥ 40 nm) if a power penalty of less than 1 dB (@BER = 10-3) is to be allowed. In fact, worst case power penalties lower than 0.25 dB are predicted over the full C band, which further proves the great potential of integrated 4 × 4 MMIs as wide-bandwidth devices for mass production of coherent receivers using state-of-the-art integration technologies.Keywords
This publication has 23 references indexed in Scilit:
- $C$-Band Optical 90$^{\circ}$ Hybrids in Silicon Nanowaveguide TechnologyIEEE Photonics Technology Letters, 2011
- Packaged Monolithic Silicon 112-Gb/s Coherent ReceiverIEEE Photonics Technology Letters, 2011
- Quadrature Imbalance Compensation for PDM QPSK Coherent Optical SystemsIEEE Photonics Technology Letters, 2009
- An Integrated InP Coherent Receiver for 40 and 100 Gb/Sec Telecommunications Systems2009
- $C$-Band Optical 90$^{\circ}$-Hybrids Based on Silicon-on-Insulator 4 $\times$ 4 Waveguide CouplersIEEE Photonics Technology Letters, 2008
- A Design Procedure for High-Performance, Rib-Waveguide-Based Multimode Interference Couplers in Silicon-on-InsulatorJournal of Lightwave Technology, 2008
- Compensation of Quadrature Imbalance in an Optical QPSK Coherent ReceiverIEEE Photonics Technology Letters, 2008
- Options, feasibility, and availability of 2 /spl times/ 4 90/spl deg/ hybrids for coherent optical systemsJournal of Lightwave Technology, 2006
- Exploring N-dimensional databases2002
- Optical bandwidth and fabrication tolerances of multimode interference couplersJournal of Lightwave Technology, 1994