Configuration‐Dependent Flexural Behavior and Microwave Transmission of Woven Lattice Sandwich‐Ply
- 19 October 2026
- journal article
- Published by Wiley in Polymer Composites
Abstract
Sandwich‐ply laminated composite (SLC), constructed by stacking woven lattice sandwich‐ply (WLS), provides a potential route for the design of lightweight multifunctional load‐bearing structures. In this study, WLSs with different configurations were designed and fabricated to investigate their flexural behavior and microwave transmission. The results show that thickness, core‐pile orientation, and foam filling jointly govern the flexural response and failure mechanisms of WLS. Increasing core height shifts the failure of unfilled WLS from face‐dominated damage to core shear failure, while the core‐pile orientation controls the damage mode between the faces and core. Foam filling markedly improves stiffness and load‐bearing capacity, suppresses core shear deformation, and shifts damage toward face fracture, cracking, and indentation. The stiffness of thicker WLS increases by approximately 723%–5073% in the warp direction and 100%–2372% in the weft direction. The load‐mass ratio increases by up to 260% and 439% in the warp and weft directions, respectively, although it decreases for some thinner WLS specimens because of the associated mass increase. For WLS with thicknesses of 2.551–16.285 mm, the band‐averaged transmittance ranges from 93.4% to 96.6% over 2–18 GHz. Four SLC radomes were further designed and tested. Their theoretical, simulated, and experimental transmission responses show good agreement, indicating the potential to tailor the transmission characteristics and target operating frequency range through WLS configuration. These findings provide guidance for the integrated mechanical and microwave design of lightweight radome structures.Keywords
Funding Information
- National Natural Science Foundation of China (12402178)
This publication has 36 references indexed in Scilit:
- Mechanical-electromagnetic multifunctional woven lattice composites: Frequency-selective performance and effects of blast-induced damageComposites Part B: Engineering, 2026
- Repeated impact behavior of multifunctional carbon fiber reinforced plastic composites sandwich structures with 3D printed novel rail interlocking coreComposites Part A: Applied Science and Manufacturing, 2025
- V‐shaped truss‐like cores for improving mechanical properties of woven lattice sandwich compositesPolymer Composites, 2025
- Conception of multifunctional sandwich-ply laminated composites and structural implementation through woven lattice sandwich layupsAerospace Science and Technology, 2024
- Additive manufacturing of fiber-reinforced polymer composites: A technical review and status of design methodologiesComposites Part B: Engineering, 2023
- A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) compositesComposites Part B: Engineering, 2023
- Fabrication and failure mechanisms of all-composite honeycomb sandwich cylinder under the axial compressionComposites Part A: Applied Science and Manufacturing, 2022
- Double-layer woven lattice truss sandwich composite for multifunctional application: Design, manufacture and characterizationComposites Part B: Engineering, 2022
- Review of z-pinned laminates and sandwich compositesComposites Part A: Applied Science and Manufacturing, 2020
- Radar stealth and mechanical properties of a broadband radar absorbing structureComposites Part B: Engineering, 2017