Seismic behavior of reinforced concrete squat walls with high strength reinforcements: An experimental study
Authors:
- 11 April 2019
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 20 (3) , 911-931
Abstract
A total of 15 squat reinforced concrete (RC) shear walls (12 of them were reinforced with high strength reinforcement of HRB600 [Grade 600 MPa] and the remaining 3 with normal grade reinforcement of HRB400 [Grade 400 MPa]) have been tested under the cyclic loading. The influencing parameters considered in the test specimens include the grade of reinforcement, axial load ratio, types of cross section, and reinforcement ratio. The seismic performances of the squat RC shear walls have been studied using the test results based on the failure mode, hysteretic behaviors, peak shear strength, deformation capacity, secant stiffness degradation, and inelastic energy dissipation capacity. The test results reveal that the failure modes of the walls with HRB600 steel bars are similar to those walls with HRB400 reinforcement. The walls with high strength reinforcement tend to achieve a larger ultimate deformation but slightly lower load carrying capacity. Both the initial stiffness and energy dissipation of the specimen hysteretic curves decrease as the reinforcement ratio increases and the parameters of cross section and reinforcement ratios have more significant effect on the seismic behavior of shear walls than that by the axial load ratio. Comparing with the walls reinforced with lower reinforcement ratio, the ones with higher reinforcement ratio exhibit larger and better peak load and deformation capacities. Shear walls with symmetrical cross section have better seismic performance than those having the asymmetric ones. When the specimens are subjected to the peak load, the stress in 90% horizontal reinforcement could reach 425 and 385 MPa for the 95% horizontal reinforcement.Keywords
Funding Information
- Natural Science Foundation of China under Grant (51178487, 51478063)
- Social Undertakings and Livelihood Security projects of Chongqing, China
This publication has 11 references indexed in Scilit:
- Numerical investigation of the shear behavior of reinforced ultra‐high‐performance concrete beamsStructural Concrete, 2017
- Flexural response of high‐strength steel‐ultra‐high‐performance fiber reinforced concrete beams based on a mesoscale constitutive model: Experiment and theoryStructural Concrete, 2017
- Influence of High-Strength Bars on Shear Response of Containment WallsACI Structural Journal, 2016
- Post‐cracking shear strength and deformability of HSS‐UHPFRC beamsStructural Concrete, 2016
- Effect of reinforcement strength on seismic behavior of concrete moment framesEarthquakes and Structures, 2015
- The Influence of the Details of Reinforcement Arrangement on Deformation Performance of Reinforced Concrete MembersQuarterly Report of RTRI, 2013
- Flexural Crack Widths in Concrete Girders with High-Strength ReinforcementJournal of Bridge Engineering, 2012
- Reconsidering the use of high-strength reinforcement in concrete columnsEngineering Structures, 2012
- Acceptance Criteria for Special Precast Concrete Structural Walls Based on Validation TestingPCI Journal, 2004
- Bruchversuche an Stahlbetonscheiben1985