Energy efficient cement free binder developed from industry waste – A sustainable approach
Authors:
- 2 February 2016
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 21 (5) , 612-628
Abstract
In this paper, the physicochemical properties and hydration mechanism of cement-free binders developed from fluorogypsum has been discussed. The results showed maximum attainment of strength (38 MPa), low water absorption (<5%) and porosity (<10) with anhydrous calcium chloride and sodium sulphate activators. The enhancement in strength with hydration period was due to the conversion of fluorogypsum into gypsum through formation of intermediate unstable salt. The reaction products were characterised using X-ray diffraction and scanning electron microscopy (SEM) techniques. SEM studies showed the appearance of prismatic and needle-shaped crystals of variable sizes interspersed with anhydrate fluorogypsum plaster which make matrix dense and compact. This change in morphology of anhydrite plaster is responsible for enhancement in strength, reduction in water absorption and porosity of cement-free binders. The engineering properties of the construction materials for use in plastering, masonry works, concrete, blocks and tiles developed from this binder are reported.Keywords
This publication has 17 references indexed in Scilit:
- Hydraulic binders of Fluorgypsum–Portland cement and blast furnace slag, stability and mechanical propertiesConstruction and Building Materials, 2010
- Development of calcium sulfate–ggbs–Portland cement bindersConstruction and Building Materials, 2009
- Study on lime–fly ash–phosphogypsum binderConstruction and Building Materials, 2007
- The long-term durability performance of gypsum–Portland cement–natural pozzolan blendsCement and Concrete Research, 2002
- The cementitious binder derived with fluorogypsum and low quality of fly ashCement and Concrete Research, 2000
- Microstructure and properties of the binder of fly ash-fluorogypsum-Portland cementCement and Concrete Research, 1999
- Setting and Hardening of Gypsum-Portland Cement-Silica Fume Blends, Part 2: Early Strength, DTA, XRD, and SEM ObservationsCement and Concrete Research, 1998
- Studies on the Binder of Fly Ash-Fluorgypsum-CementCement and Concrete Research, 1998
- Activation of gypsum anhydrite-slag mixturesCement and Concrete Research, 1995
- Hydration of mixtures containing fly-ash, lime and phosphogypsumThermochimica Acta, 1986