Size-Segregated Particulate Matter from Gasification of Bulgarian Agro-Forest Biomass Residue
Open Access
Abstract
The main purpose of the present work was to evaluate the efficiency of the gasification process of three different types of agro-forest biomass residue (rapeseed, softwood, and sunflower husks) along with the characterization of size-segregated particulates’ emissions. The experiments were carried out in a drop tube furnace (DTF), using two different gasifying agents (O2/N2 and O2/N2/CO2) at atmospheric pressure and a constant temperature of 1000 °C. In focus was the effect of biomass and the gasifying agent on syngas composition (CO, H2, CH4, and CO2), cold gas and carbon conversion efficiency, and on the emissions of by-products, such as particulate matter (PM), known for having negative environmental and health impacts. The collected particulates were characterized by SEM/EDS and XPS analysis. The results reveal that: (i) the introduction of CO2 increased the production of CO and CH4 and syngas’ lower heating value (LHV), thus leading to higher cold gas and carbon conversion efficiency; (ii) CO2 decreased the production of H2, leading to lower H2/CO ratio (between 0.25 and 0.9). Therefore, the generated syngas is suitable for the synthesis of higher hydrocarbons, (iii) CO2 lowered the emissions of char (cyclone) particles but increased the overall PM10–0.3. Submicron size PM was the dominant fraction (PM1–0.3) in O2/N2 and (PM1.6–0.3) in O2/N2/CO2. Unimodal PM size distribution was observed, except for sunflower husks gasification in O2/N2/CO2; (iv) the SEM/EDS and XPS analysis confirmed that submicron-sized PM1–0.3 contain above 80% of carbon associated to soot, due to incomplete oxidation, whereas in cyclone (char) particles, carbon decreased to about 50%. The SEM/EDS results showed that K and Cl are typical constituents of the submicron size PM, whereas the alkaline earth metals were detected mainly in fine and coarse particulates. Detailed analysis of the XPS (C1s) spectra showed that the most common oxygen-containing groups on the PM1 surface were carbonyl and carboxyl.Keywords
This publication has 42 references indexed in Scilit:
- CO2 gasification of woody biomass: Experimental study from a lab-scale reactor to a small-scale autothermal gasifierEnergy, 2019
- The effect of torrefaction on the process performance of oxygen-steam blown CFB gasification of hardwood and softwoodBiomass and Bioenergy, 2017
- Pyrolysis of rapeseed stalk: Influence of temperature on product characteristics and economic costsEnergy, 2017
- XPS surface chemical characterization of atmospheric particles of different sizesAtmospheric Environment, 2015
- Steam gasification of rapeseed, wood, sewage sludge and miscanthus biochars for the production of a hydrogen-rich syngasBiomass and Bioenergy, 2014
- Bounding the role of black carbon in the climate system: A scientific assessmentJournal of Geophysical Research: Atmospheres, 2013
- Characterisation of fuel bound nitrogen in the gasification process and the staged combustion of producer gas from the updraft gasification of softwood pelletsBiomass and Bioenergy, 2011
- Coal Gasification and Its Applications2011
- Evolution of Electrical, Chemical, and Structural Properties of Transparent and Conducting Chemically Derived Graphene Thin FilmsAdvanced Functional Materials, 2009
- Chemical properties of solid biofuels—significance and impactBiomass and Bioenergy, 2006