High-Magnification In Situ Observation of Welding Solidification
Open Access
Abstract
In welding solidification, the morphology of residual liquid in the solid–liquid coexistence region affects the susceptibility to solidification cracking because this cracking is due to localized shrinkage strain in the residual liquid. Therefore, it is important to observe the residual liquid state during solidification in detail to elucidate the occurrence of solidification cracking. In this study, a high-magnification in situ observation system was developed by combining an optical microscope and a high-speed camera. This system enables continuous, high-magnification, and high-resolution observation of welding solidification, because the objective lens of a microscope is attached to a high-speed camera. Laser welding solidification of stainless steel sheets was observed using this system and the morphology of residual liquid was visualized with higher magnification and higher definition than previous observation methods. Compared with a high-magnification image and quenched solidification microstructure, the residual state of the liquid phase during solidification could be observed in detail and dynamically. Additionally, the difference in solidification between two types of stainless sheets could be observed with high magnification in situ at one point. Finally, the combination of the observation results from this system and a high-temperature ductility curve revealed the relationship between the morphology of residual liquid and solidification cracking susceptibility.Keywords
This publication has 31 references indexed in Scilit:
- Effect of welding current and speed on solidification cracking susceptibility in gas tungsten arc fillet welding of dissimilar aluminum alloys: Coupling a weld simulation and a cracking criterionJournal of Materials Research and Technology, 2024
- A Review on Factors Influencing Solidification Cracking of Magnesium Alloys During WeldingMetals and Materials International, 2024
- A review: Suppression of the solidification cracks in the laser welding process by controlling the grain structure and chemical compositionsJournal of Advanced Joining Processes, 2023
- Influence of Liquid Film Characteristics on Hot Cracking Initiation in Al–Cu Alloys at the End of SolidificationActa Metallurgica Sinica (English Letters), 2022
- Effect of sulfur, phosphorus, silicon, and delta ferrite on weld solidification cracking of AISI 310S austenitic stainless steelEngineering Failure Analysis, 2022
- Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasoundActa Materialia, 2021
- In situ observation of solidification crack propagation for type 310S and 316L stainless steels during TIG welding using synchrotron X-ray imagingJournal of Materials Science, 2021
- Study of Solidification Cracking in a Transformation-Induced Plasticity-Aided SteelMetallurgical and Materials Transactions A, 2018
- Solidification cracking of superalloy single- and bi-crystalsActa Materialia, 2004
- Welding: Solidification and microstructureJOM, 2003